Speedometer Calibration Tool from Super Kilometer Filters allowing to stop counting the mileage while in the motion
Also known as: Mileage freezer – Odometer Rollback – Mileage stop – Odometer Correction – Can filter – Can blocker
Your mileage freezer for BMW
- Easy and fast installation ✔️
- Dismount the odometer, disconnect it and attach the mileage freezer with the original plug connector ✔️
- The installation does not require cutting or soldering of cables ✔️
- It can be activated by pressing a button on the steering wheel ✔️
- No error messages displayed on the speedometer or navigation panel ✔️
- It comes with an original connector with a high-quality plug ✔️
- The confirmation of the activation will be displayed on the speedometer ✔️
- MADE IN GERMANY ✔️
This device is compatible with all BMW F series regardless of software version.
If the vehicle has received a software update, you can simply activate mode two and continue using this device.
No exchange or update required.
Press BC button for 10 sec.
Repeat the process to switch from mode to mode. The turn lights flash briefly according to the currently selected mode: Mode 1 = 1x flashing, Mode 2 = 2x flashing etc.
Mode 1: The mileage is stopped. The speed indicator and assistance systems work. (This mode only works with F models WITHOUT a software update from 2019)
Mode 2: The mileage is stopped and the speed indicator and assistance systems do not work. (This mode only works with F models WITH a software update from 2019)
Mode 3: The counted miles are halved (1/2) and the speed indicator shows half of the actual speed.
Mode 4: The counted miles are quartered (1/4) and the speed indicator shows quarter of the actual speed.
❌ Deactivation ❌
Mode 4: The device is deactivated and the speed indicator shows the actual speed.
The Can Blocker always maintains the last applied settings. Hence, you don’t have to change the settings before starting the car next time.
The device can be activated or deactivated, either while driving or when stationary.⚙️
What is an Odometer Stopper – Can Filter? 📍
The BMW Can Filter makes it possible to stop counting up the distance traveled by the vehicle.
This device is also called Odometer Stopper, Speedometer Calibration Tool, Can Blocker, Odometer Freezer or Odometer Blocker. Activation and deactivation of the Odometer Stopper can be easily accomplished by pressing several buttons.
We offer a wide variety of odometer devices for various vehicles. The installation process of Can Blocker is the same for all the models and doesn’t require in-depth knowledge of vehicle’s maintenance. It just has to be plugged in between the port of the speedometer and the instrument cluster.
Our blockers are made in Germany. We only use heat-resistant, hard-wearing cables, as it’s standard in the automotive industry.
The Speedometer Calibration Tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.
The device can be activated or deactivated, either while driving or when stationary.
Attention! This device is appropriate only for testing and tuning purposes and not for the public traffic.
The Can Blocker is not suitable for fraudulent purposes.