Hyundai Tucson Speedometer Calibration Tool – CAN Filter
Also known as: Trip Odometer – Mileage Stopper – Odometer Correction Tool – Odometer stopper – Can Blocker – Mileage Stopping – Odometer Rollback – Odometer Adjustment
This module is suitable for Hyundai Tucson from 2019 – 2020
Your Odometer Stopper for the Hyundai Tucson
Easy and fast installation ✔️
Dismount the odometer, disconnect it and attach the Speedometer Calibration tool with the original plug connection ✔️
The installation does not require cutting or soldering of cables ✔️
It can be activated by pressing a button on the steering wheel ✔️
No error messages displayed in the speedometer or navigation panel ✔️
Original connector with high quality finish ✔️
No error messages in the dashboard ✔️
Confirmation of the activation will be displayed on the speedometer ✔️
Activation and Deactivation of the module
✔️ Switch On ✔️
Press 3x the ESP button. The turn light signal will flash briefly and the mileage will no longer be counted.
⚠️ Caution! When the module is activated, assistance systems and speedo do not work. ⚠️
❌ Switch Off ❌
Press 3x the ESP button, again. The turn light signal will flash briefly and the device will be deactivated.
⚙️ The Speedometer Calibration Tool always save the last setting. Nothing has to be reset every time you start your journey.
The module can be activated or deactivated at any time, both while driving and while stationary ⚙️
What is a Speedometer Calibration Tool – Odometer Correction? 📍
The Hyundai Tucson Speedometer Calibration Tool makes it possible to stop the counting pulses in the vehicle.
This device is also called Odometer Stopper, Speedometer Calibration Tool, Can Blocker, Odometer Freezer or Odometer Blocker. Activation and deactivation of the Odometer Stopper can be easily accomplished by pressing several buttons.
We offer a wide variety of odometer devices for various vehicles. The installation process of Can Blocker is the same for all the models and doesn’t require in-depth knowledge of vehicle’s maintenance. It just has to be plugged in between the port of the speedometer and the instrument cluster.
The module can be activated or deactivated anytime, whether the car is in motion or stationary.
Are you looking for a module for another vehicle? Then press here 🌐
⚠️ Attention! This device is appropriate only for testing and tuning purposes. However, not for the public traffic.
Similarly, the Can Blocker is not suitable for fraudulent purposes ⚠️