€245,00 – €350,00
Please note that if the returned items are not in the original condition, or show some signs of usage, this includes removing or damaging the casing and protective sleeve, you will not be entitled to a refund. Similarly, in case of returning the products after long usage, that goes beyond the testing of the properties and functionality, you will not get the full refund.
Change modes via smartphone app or press the RETURN ↩️ button for 10 seconds
The mode is confirmed by sounding the “warning signal” (Mode 1 is always active during installation)
Example: 1x warning signal = mode 1, 4x warning signal = mode 4
Repeat the same process to switch from mode to mode
The mileage counter is stopped 100%
The speed indicator does not work
10% of the actual mileage is recorded and 1/10 of the actual speed is shown on the speedometer
Example: You drive at 60mph and the speedometer shows 6mph
50% of the actual mileage is recorded and the speedometer shows 50% of the actual speed
Example: You drive at 100 mph and the speedometer shows 50 mph
0% of the actual mileage is recorded and the speedometer works without any interference.
The module is deactivated
If the speedometer in your vehicle does not work properly, a calibration is necessary.
To start the calibration press the return key 10 times when the module is on. Ideal for calibration is a speed of 60KM/h or 60MP/h. After that you can adjust the speed with the arrow up and down keys. (Please press the buttons in larger intervals & observe whether the speed changes during the ride on the speedometer). If the speed is set correctly, please press the OK button until an acknowledgment appears (speedometer needle drops to 0KM/h or the vehicle beeps 1x briefly). Finally, press the Return key 12 times to exit the calibration mode.
Mercedes E-Class C207/A207 – W212 Kilometer Stopper tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.
The device can be activated or deactivated, either while in motion or when stationary.
Mercedes E-Class C207/A207 – W212 Mileage Blocker / Odometer Blocker lets you stop the mileage in a car while testing its performance. At Super Kilometer Filter you can get the best module with genuine components. The Mileage Blocker tool works perfectly on a diesel-gasoline engine as well as Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars. Whether the digital odometer of your vehicle counts mileage in miles or kilometers (km), the device will work equally efficiently. Our programmers write software specifically for each maker and model to make sure it works perfectly.
Be informed, we don’t sell Mileage Correction tools for Mercedes E-Class C207/A207/ – W212 as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. They are usually used to rewind/roll back the distance traveled. However, cars have multiple data storage units and rollback tools still fail to reverse the mileage altogether.
We offer a wide variety of Mileage Stopper devices for various vehicles. Install the module and use pre-determined key combinations to change from mode to mode. The installation process is the same for all the models and doesn’t require in-depth knowledge of a vehicle’s maintenance. Plug it between the port of the speedometer and the instrument cluster and you can enjoy all the benefits of this unique module.
Mercedes E-Class C207/A207 – W212 Mileage Blocker can be activated or deactivated anytime, whether the car is in motion or stationary.
The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.
|Which cable is right for you ?||
Long cable, Short cable
|Do you need this feature?||
With App, Without App
Here you will find all the details about our company
Here you will find shipping and return related information
Here you will find information on all technical questions
Here you will find helpful information about installation