Please note that if the returned items are not in the original condition, or show some signs of usage, this includes removing or damaging the casing and protective sleeve, you will not be entitled to a refund. Similarly, in case of returning the products after long usage, that goes beyond the testing of the properties and functionality, you will not get the full refund.
Our Mileage Blocker not only stops counting covered distance in all memories of a vehicle but also automatically corrects the service. The only part which isn’t stopped while using the tool is „Service“. It is still counted down but does not record any mileage until 30% is remaining. If there remains 30% before the due date, it automatically jumps back up to 90%. If it’s pushed back up to 90% from 30%, before a message was sent, then that service reset is not recorded.
Each service is counted down from the traveled distance time. The service interval for a vehicle is structured like this. As a rule, a service must be made in every 30,000 km for diesel and 15,000 for petrol. The service is counted down while driving. If you drove 1,000 km then the next service would be in 29,000 km. If you stop mileage, then the service shouldn’t count down, but it still continues working until it reaches 30%. In the case of 30,000km, remained 30% is equal to 9,000 km.
When the kilometer stopper is active, it automatically pushes the service back up to 90%, so to 27,000km. The abovementioned numbers are not 100% correct, because many engines have different service intervals, but the percentages are correct.
Change modes via smartphone app or press the BC button for 10 seconds
Repeat the process to switch from mode to mode
All percentages of the distance driven are approximate and not binding because they are influenced by the environment ( city/ traffic jam/ highway). And only after a longer distance of approx. 100 km / mi can you see what percentage was actually counted.
The module is always pre-activated in MODE 1 / ON
Mode 1
1. Vehicle till 2019 and without update and the live cockpit: Speed display works and the Mileage counting is stopped.
1. Vehicle: Speed = original, Counting miles approx 0-1%. Works only with models until 2019, without Update and the Live Cockpit.
Mode 2
No speed and the Mileage counting is stopped
Mode 3
Speed display works and the miles count is reduced to 30%.
Mode 4
Speed display works and the miles count is reduced to 40%.
Mode 5
The kilometers are counted at 100%
BMW 6er G32 GT Kilometer Stopper tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.
The device can be activated or deactivated, either while in motion (only for certain vehicles) or when stationary.
BMW 6er G32 GT Mileage Blocker / Odometer Blocker helps you avoid extra mileage in a car while testing its performance. Our programmers write software specifically for each maker and model to make sure that it works flawlessly. At Super Kilometer Filter you can get the best module with unique details. The tool works perfectly whether the digital odometer of your vehicle counts mileage in miles or kilometers (km). Install the module and use pre-determined key combinations to change from mode to mode.
Please take into consideration that we don’t sell Mileage Correction tools for BMW 6er G32 GT as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. They are usually used to rewind/roll back the distance traveled. However, modern cars have multiple data storage units and rollback tools still fail to reverse the mileage altogether.
We offer a wide variety of Mileage Stopper devices for various vehicles. The Mileage Blocker tool works perfectly on a diesel-gasoline engine as well as Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars. The installation is the same for all the models and doesn’t require in-depth knowledge of a vehicle’s maintenance. Plug it between the port of the speedometer and the instrument cluster and enjoy all the benefits of the tool.
BMW 6er G32 GT Mileage Blocker is an extraordinary device, that allows you to test the performance of your automobile in a controlled environment.
The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.
Weight | 100 g |
---|---|
Cable length | Long cable, Short cable |
App compatibility | With App, Without App |
Only logged in customers who have purchased this product may leave a review.
Make | Model | Year |
---|---|---|
BMW | 6ER G32 GT | 2017 - 2023 |
Here you will find all the details about our company
Here you will find shipping and return related information
Here you will find information on all technical questions
Here you will find helpful information about installation
Anonymous –
Works perfect
Paul –
It works and freeze the mileage