Please note that if the returned items are not in the original condition, or show some signs of usage, this includes removing or damaging the casing and protective sleeve, you will not be entitled to a refund. Similarly, in case of returning the products after long usage, that goes beyond the testing of the properties and functionality, you will not get the full refund.
Change modes via smartphone app or press and hold the Return button ↩️ for approx. 10 seconds.
The mode is confirmed by sounding the “warning signal”. (Mode 1 is always active during installation)
Example: 1x warning signal = mode 1, 4x warning signal = mode 4
Repeat the process to switch from mode to mode.
The module is always pre-activated in MODE 1 / ON
Mode 1
The mileage counter is stopped 100%
Mode 2
10% of the driven mileage are counted and 1/10 of the actual speed is shown on the speedometer.
Mode 3
The mileage is halved (50%) and the speedometer also shows 50% of the actual speed.
Mode 4
The mileage counter is stopped 100%
Mode 5
Odometer counts 100% of the mileage
If the speed in your vehicle does not work properly, a calibration is necessary.
To start the calibration press the return key 10 times when the module is on. Ideal for calibration is a speed of 60KM/h or 60MP/h. After that you can adjust the speed with the arrow up and down keys. (Please press the buttons in larger intervals & observe whether the speed changes during the ride on the speedometer). If the speed is set correctly, please press the OK button until an acknowledgement appears (speedometer needle drops to 0KM/h or the vehicle beeps 1x briefly). Finally, press the Return key 12 times to exit the calibration mode.
Mercedes GLE, W166/C292, Kilometer Stopper tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.
The device can be activated or deactivated, either while in motion or when stationary.
Mercedes GLE W166-C292, Mileage Blocker / Odometer Blocker is used for stopping the mileage in a car while testing its performance. At Super Kilometer Filter you can buy the best module with genuine details. Whether the digital odometer of your vehicle counts mileage in miles or kilometers (km), the device will work equally efficiently. Our programmers write software specifically for each maker and model to make sure that it works without any fault. The Mileage Blocker tool works perfectly on a diesel-gasoline engine, as well as, Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars. Install the module and use pre-determined key combinations to change from mode to mode.
We don’t sell Mileage Correction tools for Mercedes GLE W166-C292 as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. They are usually used to rewind / rollback the distance traveled. However, cars have multiple data storage units and roll back tools still fail to reverse the mileage altogether.
We offer a wide variety of Mileage Stopper devices for various vehicles. The installation process is the same for all the models and doesn’t require in-depth knowledge of a vehicle’s maintenance. Plug it between the port of the speedometer and the instrument cluster and you can enjoy all the benefits of this unique module.
Mercedes GLE W166-C292 Mileage Blocker can be activated or deactivated anytime, whether the car is in motion or stationery.
It is recommended that you purchase the Openport 2.0 together with a Mercedes Kilometer Filter. After the purchase, you should contact our support team to finalize the installation. The support team will provide the login token for the MB Tools software free of charge (the offer is only valid for those who have already bought the Openport 2.0 in our shop). You can use it to make one of the following adjustments:
Speedometer programming:
customize your speedometer, reset it (Virginize) and activate the AMG menu (only possible with certain speedometers).
Carplay activation:
Activate Carplay with just a few clicks (only possible with suitable hardware).
Software updates:
Keep your vehicle up to date by carrying out software updates directly via MB Tools.
Add it to your shopping cart now and benefit from the advantages of this combined solution for your vehicle. Please note that we can only guarantee flawless functionality with the Openport purchased in our shop. We have devoted a lot of time to the research and development of this product to ensure it will work without any issues. Hence, we can guarantee the unblemished performance of our Openport 2.0 device even though those from other providers often have a lot of issues.
To view the programming options for your vehicle, please visit the MB Tools website and search for your car.
Here is the link to the Openport 2.0 device.
The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.
Weight | 100 g |
---|---|
Maximum speed of the speedometer | 260 KM/h – 160 MP/h, 320 KM/h – 200 MP/h |
App compatibility | With App, Without App |
Only logged in customers who have purchased this product may leave a review.
Make | Model | Year |
---|---|---|
Mercedes | GLE W166 C292 | 2015 - 2018 |
Here you will find all the details about our company
Here you will find shipping and return related information
Here you will find information on all technical questions
Here you will find helpful information about installation
Anonymous –
work perfect
Marcos Perez Bedia –
I had a problem with the updates of my car so the SKF device did not work in my car but the support team was very helpful to solve the inconvenient.
Kevin –
Fitted in around 20 mins all in, super easy. Had it calibrated and working soon after. Very impressed so far, will definitely help with all the long boring motorway journeys keeping the miles down. The beauty is putting the cruise control on and the speedo completely off 🙂 well worth the money!
Johan Stevens –
Works fine
Magdalena A. –
Good customer service
Anonymous –
Anonymous –
I own a Mercedes Benz 2015 S350 BLUETECH (W222).
Installing the device was not complicated. It must be noted that in my car the release of the dashboard as it appeared in the videos was not so, after the release of the 3 screws that hold the dashboard, the dashboard was still occupied and refused to be released. At the same time, I found access to the backplane and from this point it was already simpler to connect the device.
The device works great, highly recommend as well as recommend using the app. It is convenient and friendly.
Just to note, the speedometer shows the speed but does not work smoothly (increase and decrease of the speed), as it works without the device.
Thank you very much.
Anonymous –
Konstantin –
Отличная работа
Anna (store manager) –
Мы ценим ваш отзыв.
Przemysław Kowalewski (verified owner) –
it works perfect