What happens if I remove the module again?

CADILLAC CT5

Before ordering, please read carefully about the module activation and important notes on error messages and functions below.

FOR MODELS THAT WERE RELEASED SINCE 2021

Look carefully at the BCM in the driver’s side footwell. This is the product for the new generation BCM that has 8 plugs. If you have 7 plugs, please select the module for the old generation from your vehicle in the Shop
Engine control lamp lights up permanently, it has no effect on the engine
Important notice for the installation: use the grey plug on the picture no.4 and the green plug no.5
No app control, the device cannot be turned off, only manually plugged in
After installation, all error messages must be deleted once with a Dignostic tool
Remote engine start does not work

MILEAGE BLOCKER FOR CADILLAC CT5

CADILLAC CT5 Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

SPECIFICATIONS

Comes with premium-quality plugs and heat-resistant cables
After removing the module, the mileage doesn’t increase spontaneously
No error messages displayed on the speedometer or navigation panel
Mating face and Ridges on the connector guarantee a smooth installation process
The average consumption cannot be calculated correctly
After installation, all error messages must be deleted once with a Dignostic tool

The diagnostic testers cannot discover the mileage altered by Cadillac CT5 Mileage Stopper
Select settings once and they will be saved unconditionally
Engine control lamp lights up permanently, it has no effect on the engine
Speedometer and all the other assistance systems work flawlessly
Easy DIY installation, simply disconnect the connector from BCM and connect the tool between BCM and wiring
Doesn’t leave a trace if you detach the tool: no soldering or cutting of cables required

For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.

ACTIVATION & DEACTIVATION

This module cannot be turned on or off by a combination of buttons, it is permanently on. Installation is very simple: just plug it into the footwell, or replace it with the dummy plug to deactivate it.

Remote engine start does not work

ON
Plug into the footwell

Connect the module by plugging it into the footwell.
No actual mileage is counted

OFF
Use the blind plug

Replace the module with the blind plug.
The module is deactivated and everything works as usual

Cadillac CT5 Kilometer Stopper tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.

The device can be activated or deactivated, either while in motion or when stationary.

What is Cadillac CT5 Odometer Blocker or Mileage Correction Tool?

Cadillac CT5 Mileage Blocker / Odometer Blocker was created for stopping the mileage in a car while testing its performance. At Super Kilometer Filter you can get the best module with unique details. The Mileage Blocker tool works perfectly both, on a diesel-gasoline engine as well as Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars. Whether the digital odometer of your vehicle counts mileage in miles or kilometers (km), the device will work equally efficiently. Our programmers write software specifically for each maker and model in order to make sure that it works flawlessly.

Be aware, we don’t sell Mileage Correction tools for Cadillac CT5 as they are meant for fraudulent purposes and can solely remove the mileage figures from odometers. They are usually used to rewind/roll back the distance traveled. However, modern cars have multiple data storage units and rollback tools still fail to reverse the mileage altogether.

We offer a wide variety of Mileage Stopper devices for various vehicles. Install the module and use pre-determined key combinations to turn the tool on and off. The installation process is the same for all the models and doesn’t require in-depth knowledge of a vehicle’s maintenance. Plug it between the port of the speedometer and the instrument cluster and you can enjoy all the benefits of this unique module.

Cadillac CT5 Mileage Blocker can be activated or deactivated anytime, whether the car is in motion or stationary.

FAQ

The Mileage Blocker unconditionally removes the mileage. The mileage figures will remain unchanged even after removing the module from the car. You can use our Mileage Blocker to alter the mileage and remove it anytime. Stopped mileage will not increase spontaneously after removing the module. However, in most cases, error messages should be deleted after removing the tool. Can Communications save any interruption messages as error messages. These are sporadic errors that do not necessarily have to be deleted, but it is recommended.

Warning

The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.

Additional information

Weight	100 g
Choose your Speedometer / Steering wheel	BCM new, BCM old
App compatibility	With App, Without App
Cable length	Long cable, Short cable

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Make	Model	Year
Cadillac	CT5	2021 - 2025

Choose your Speedometer / Steering wheel Pay close attention to determine which interior (speedometer and steering wheel) you have to get the right product. As soon as you have chosen the right option, the relevant image will be displayed. Take into consideration every little detail. E.g. buttons on the steering wheel, the maximum speed, the year of construction, type of speedometer (analog or digital), and the plug connector on the cable. If you are unsure, please contact our customer service team before purchasing, they will be happy to assist you during the selection process.
App compatibility With this feature, you can connect your module directly to our SKF Speed App on your smartphone. This will allow you in the future to control your module easily and safely with your smartphone without complicated key combinations. When required, the module can be deactivated without having to remove it. The SKF Speed App has helpful features and provides useful information. It is the world's first smartphone app to control a Mileage Blocker.	With App Without App
Cable length Mileage Blocker with long cables are suitable for vehicles that require complicated installation process. The long end piece can be easily hidden behind a panel. If you want to remove the device for any reason, you can replace the Mileage Blocker with a blind plug and you will not have to completely dismantle the dashboard every time.	Long cable Short cable Clear

CADILLAC CT5

€443,23 – €1.522,73