TOYOTA PRIUS (4th GEN.) XW50

1 Reviews

Before ordering, please read carefully about the module activation and important notes on error messages and functions below.

THIS DEVICE IS SUITABLE FOR ALL TOYOTA PRIUS (4th GEN.) XW50 MODELS THAT WERE RELEASED SINCE 2016

Do-it-yourself installation
Untraceable performance
Can be activated in motion
Premium-quality plugs and heat-resistant cables
Speedometer and assistance programs work flawlessly
The ability to purchase with or without an app

MILEAGE BLOCKER FOR TOYOTA PRIUS (4th GEN.) XW50

TOYOTA PRIUS (4th GEN.) XW50 Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

Installation Videos

SPECIFICATIONS

Do-it-yourself (DIY) installation allows you to install the tool within less than an hour
The tool comes with premium-quality plugs and heat-resistant cables
The diagnostic testers cannot discover the mileage altered by Toyota Prius XW50 Mileage Stopper
No soldering or cutting of cables required
Easy to operate with several key combinations
Can be turned on and off while in motion

Mating face and Ridges on the connector guarantee a smooth installation process
After detachment, the mileage doesn’t increase spontaneously
Selected settings are saved unconditionally
Speedometer and all the other assistance systems work without any fault
No error messages displayed on the speedometer or navigation panel

For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.

ACTIVATION & DEACTIVATION

The activation/deactivation method depends on whether your Toyota has a Cruise Control or not

Pull the Cruise Control lever (situated on the right, under the steering wheel) towards you for 4 seconds
OR
Press and hold the CANCEL button for 10 seconds
OR
Pull the High Beam lever 4 times

or change modes via smartphone app or press

The module is always pre-activated in MODE 1 / ON

ON
The kilometers are stopped at 100%

When the module is activated, the message “Driver’s door open” will appear briefly

OFF
The kilometers are counted at 100%

When the module is deactivated, the message “Passenger door open” will appear briefly

Toyota Prius XW50 Kilometer Stopper tool always keeps the last saved settings, therefore, there is no need to change them before starting a new ride.

You can activate or deactivate the Mileage Blocker either while in motion or when stationary.

What is Toyota Prius XW50 Odometer Blocker or Speedometer Calibration Tool?

Toyota Prius XW50 Mileage Blocker/Odometer Blocker is meant for stopping the mileage in a car while testing its performance. At Super Kilometer Filter you can buy the best module with genuine components. Whether the digital odometer of your vehicle counts mileage in miles or kilometers (km), the device will work equally efficiently. Our programmers write software for each manufacturer and model to make sure that it works smoothly. The Mileage Blocker tool works perfectly on a diesel-gasoline engine, as well as Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars. Install the module and try pre-determined key combinations to turn the tool on and off.

Please take into consideration, that we don’t sell Speedometer Calibration tools for Toyota Prius XW50 as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. A speedometer Calibration tool is usually used to rewind/roll back the distance traveled. However, modern cars have multiple data storage units and rollback tools still fail to reverse the mileage altogether.

We offer comprehensive Mileage Stopper devices for various vehicles. The installation process is the same for all the models and doesn’t require in-depth knowledge of a vehicle’s maintenance. Plug it between the port of the speedometer and the instrument cluster and you can enjoy all the benefits of this unique module.

Toyota Prius XW50 Mileage Blocker can be activated or deactivated anytime, whether the car is in motion or stationary.

FAQ

The Mileage Blocker unconditionally removes the mileage. The mileage figures will remain unchanged even after removing the module from the car. You can use our Mileage Blocker to alter the mileage and remove it anytime. Stopped mileage will not increase spontaneously after removing the module. However, in most cases, error messages should be deleted after removing the tool. Can Communications save any interruption messages as error messages. These are sporadic errors that do not necessarily have to be deleted, but it is recommended.

If your Toyota has a VDO speedometer, the speedometer will not work. The Mileage are stopped but the speed drops to 0. When you turned off this device, everything will be back to normal. In the rarest of cases, a VDO speedometer is installed. Almost all Toyota Cars from all over the world have a Denso speedometer.

Warning

The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.

Additional information

Weight	100 g
Cable length	Long cable, Short cable
App compatibility	With App, Without App

1 review for TOYOTA PRIUS (4th GEN.) XW50

Rated 5 out of 5

HIHHSIEH SUS – May 18, 2022

good

(0) (0)
Rated 5 out of 5

Viktor (verified owner) – September 15, 2024

Good!!!👍

(0) (0)