MILEAGE BLOCKER FOR TOYOTA HIGHLANDER (4th GEN.) XU70

TOYOTA HIGHLANDER (4th GEN.) XU70 Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

Installation Videos

SPECIFICATIONS

The Mileage blocker comes with DIY installation
Comes with high-quality plugs and heat-resistant cables
No soldering or cutting of cables required for installation
No error messages displayed on the speedometer or navigation panel
Speedometer and all the other assistance systems work flawlessly
Speed indicator also works while the device is active

The tool can be turned on and off while in motion
After the tool removal, the mileage doesn’t increase spontaneously
It can be activated by pressing a button on the steering wheel
The diagnostic testers cannot discover the mileage altered by Toyota Highlander XU70 Mileage Stopper
Select settings once and they will be saved unconditionally
Mating face and Ridges on the connector guarantee a smooth installation process

For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.

Important note

After installation, it is pivotal to clear all error messages with a universal diagnostic tester. Follow the installation instructions and start the car. You will not have to do anything if there are no error messages. However, if error messages appear, the end piece should be unplugged and plugged back in. Afterwards, you can clear all error messages and the device will work without any issues.

ACTIVATION & DEACTIVATION PreFacelift

The activation/deactivation method depends on whether your Toyota has a Cruise Control or not

Pull the Cruise Control lever (situated on the right, under the steering wheel) towards you for 4 seconds
OR
Press and hold the CANCEL button for 10 seconds
OR
Pull the High Beam lever 4 times

or change modes via smartphone app or press

All percentages of the distance driven are approximate and not binding because they are influenced by the environment ( city/ traffic jam/ highway). And only after a longer distance of approx. 100 km / mi can you see what percentage was actually counted.

The module is always pre-activated in MODE 1 / ON

ON
The kilometers are stopped at 100%

When the device is activated, the message “Passenger door open” will appear briefly

OFF
The kilometers are counted at 100%

When the device is deactivated, the message “Passenger door open” will appear briefly

ACTIVATION & DEACTIVATION Facelift

The activation/deactivation method depends on whether your Toyota has a Cruise Control or not

or change modes via smartphone app or press

The module is always pre-activated in MODE 1 / ON

Mode 1
The kilometers are stopped at 100%

The fuel gauge is not displayed correctly

Mode 2
Only 1% - 2% of the actual mileage is recorded. We recommend to use this mode

The fuel gauge is displayed correctly, everything works as usual

Mode 3
100% of the actual mileage is recorded

The module is deactivated

Toyota Highlander XU70 Kilometer Stopper tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.

The device can be activated or deactivated, either while in motion or when stationary.

What is Toyota Highlander XU70 Odometer Blocker or Mileage Correction Tool?

Toyota Highlander XU70 Mileage Blocker / Odometer Blocker is used for stopping counting unnecessary miles (km) in a car while testing its performance. At Super Kilometer Filter you can buy the best module tool with genuine components. Whether the digital odometer of your vehicle counts mileage in miles or kilometers (km), the device works equally efficiently. Our programmers write software specifically for each manufacturer and model, which gives a possibility to use the tool flawlessly. The Mileage Blocker tool works perfectly on a diesel-gasoline engine, as well as Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars.

Please note that we don’t sell Mileage Correction tools for Toyota Highlander XU70 as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. They are usually used to rewind/roll back the distance traveled. However, cars have multiple data storage units and rollback tools still fail to reverse the mileage altogether.

We offer a wide variety of Mileage Stopper devices for different vehicles. The installation process is easy and doesn’t require knowledge of a vehicle’s maintenance. For using the tool, plug it between the port of the speedometer and the instrument cluster, and you are ready to enjoy all the benefits.

Toyota Highlander XU70 Mileage Blocker can be activated and deactivated in 10 seconds. The activation and deactivation process can be done in motion or stationary mode.

FAQ

The Mileage Blocker unconditionally removes the mileage. The mileage figures will remain unchanged even after removing the module from the car. You can use our Mileage Blocker to alter the mileage and remove it anytime. Stopped mileage will not increase spontaneously after removing the module. However, in most cases, error messages should be deleted after removing the tool. Can Communications save any interruption messages as error messages. These are sporadic errors that do not necessarily have to be deleted, but it is recommended.

If your Toyota has a VDO speedometer, the speedometer will not work. The Mileage are stopped but the speed drops to 0. When you turned off this device, everything will be back to normal. In the rarest of cases, a VDO speedometer is installed. Almost all Toyota Cars from all over the world have a Denso speedometer.

Warning

The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.

Additional information

Weight	100 g
Choose your Speedometer / Steering wheel	Facelift – Digital, Pre Facelift – Analog
Cable length	Long cable, Short cable
App compatibility	With App, Without App

2 reviews for TOYOTA HIGHLANDER (4th GEN.) XU70

Rated 5 out of 5

Ibrahim AlJaloudi – February 24, 2022

I order the stopper for Toyota Highlander 2021 and I receive it but we don’t see the video to install it I need the video to install the kilometer filter for Highlander 2021

(0) (0)
Rated 5 out of 5

Anonymous (verified owner) – April 7, 2023

Works great and easy to install

(0) (0)
- Anna (store manager) – April 7, 2023
  
  We appreciate your review.
Rated 5 out of 5

Anonymous (verified owner) – April 21, 2024

…I ordered the wrong part by accident, customer service has been great and quick!

(0) (0)

Only logged in customers who have purchased this product may leave a review.

Make	Model	Year
Toyota	HIGHLANDER (4th GEN.) XU70	2019 - 2026

Choose your Speedometer / Steering wheel Pay close attention to determine which interior (speedometer and steering wheel) you have to get the right product. As soon as you have chosen the right option, the relevant image will be displayed. Take into consideration every little detail. E.g. buttons on the steering wheel, the maximum speed, the year of construction, type of speedometer (analog or digital), and the plug connector on the cable. If you are unsure, please contact our customer service team before purchasing, they will be happy to assist you during the selection process.
Cable length Mileage Blocker with long cables are suitable for vehicles that require complicated installation process. The long end piece can be easily hidden behind a panel. If you want to remove the device for any reason, you can replace the Mileage Blocker with a blind plug and you will not have to completely dismantle the dashboard every time.	Long cable Short cable
App compatibility With this feature, you can connect your module directly to our SKF Speed App on your smartphone. This will allow you in the future to control your module easily and safely with your smartphone without complicated key combinations. When required, the module can be deactivated without having to remove it. The SKF Speed App has helpful features and provides useful information. It is the world's first smartphone app to control a Mileage Blocker.	With App Without App Clear

TOYOTA HIGHLANDER (4th GEN.) XU70

€379,73 – €640,08