SUBARU Crosstrek

Before ordering, please read carefully about the module activation and important notes on error messages and functions below.

THIS DEVICE IS SUITABLE FOR ALL SUBARU CROSSTREK MODELS THAT WERE RELEASED SINCE 2024

Do-it-yourself installation
Untraceable performance
Can be activated in motion
Premium-quality plugs and heat-resistant cables
Speedometer and assistance programs work flawlessly

Coming soon

MILEAGE BLOCKER FOR Subaru Crosstrek

Subaru Crosstrek Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

THIS DEVICE IS SUITABLE FOR ALL SUBARU CROSSTREK MODELS THAT WERE RELEASED SINCE 2024

Installation Videos

SPECIFICATIONS

Do-it-yourself (DIY) installation takes up to an hour
Speedometer and all the other assistance systems work flawlessly
No error messages displayed on the speedometer or navigation panel
Comes with premium-quality plugs and heat-resistant cables
Doesn’t leave a trace after detachment
No soldering or cutting of cables required

Activated by pressing a button on the steering wheel
After removing the module, the mileage doesn’t increase spontaneously
The diagnostic testers cannot discover the mileage altered by Subaru Crosstrek Mileage Stopper
Selected settings will be saved unconditionally
Mating face and Ridges on the connector guarantee a smooth installation process
Easy to operate with several key combinations

For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.

ACTIVATION & DEACTIVATION

The activation/deactivation method depends on whether your Subaru has a Cruise Control or not

Pull the Cruise Control lever (situated on the right, under the steering wheel) towards you for 4 seconds
OR
Press and hold the CANCEL button for 10 seconds
OR
Pull the High Beam lever 4 times

or change modes via smartphone app

The module is always pre-activated in MODE 1 / ON

Mode 1
The kilometers are stopped at 100%

When the module is activated, the message “Driver’s door open” will appear briefly

Mode 2
The kilometers are stopped at 50%

When the module is activated, the message “Driver’s door open” will appear 2 times briefly

Mode 3
The kilometers are counted at 100%

When the module is deactivated, the message “Driver’s door open” will appear 3 times briefly

Subaru Crosstrek Kilometer Stopper tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.

The device can be activated or deactivated, either while in motion or when stationary.

What is Subaru Crosstrek Odometer Blocker or Mileage Correction Tool?

Subaru Crosstrek Mileage Blocker / Odometer Blocker gives you possibility to avoid counting extra mileage in a car while testing its performance. At Super Kilometer Filter you can buy the best module with genuine components. Our programmers write software specifically for each maker and model to make sure that it works flawlessly. Even-if, the digital odometer of your vehicle counts mileage in miles or kilometers (km), the device will work equally efficiently. Install the module and use pre-determined key combinations to change from mode to mode. The Mileage Blocker tool works perfectly on a diesel-gasoline engine, as well as, Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars.

Please be informed, that we don’t sell Mileage Correction tools for Subaru Crosstrek as they are meant for fraudulent purposes and can solely remove the mileage figures from odometers. They are usually used to rewind / rollback the distance traveled. Nonetheless, cars have multiple data storage units and roll back tools still fail to reverse the mileage altogether.

We offer a wide variety of Mileage Stopper devices for various vehicles. The installation process is the same for all the models and doesn’t require in-depth knowledge of a vehicle’s maintenance. Plug it between the port of the speedometer and the instrument cluster and you can enjoy all the benefits of this unique module.

Subaru Crosstrek Mileage Blocker can be activated or deactivated anytime, whether the car is in motion or stationery.

FAQ

The Mileage Blocker unconditionally removes the mileage. The mileage figures will remain unchanged even after removing the module from the car. You can use our Mileage Blocker to alter the mileage and remove it anytime. Stopped mileage will not increase spontaneously after removing the module. However, in most cases, error messages should be deleted after removing the tool. Can Communications save any interruption messages as error messages. These are sporadic errors that do not necessarily have to be deleted, but it is recommended.

If your Subaru has a VDO speedometer, the speedometer will not work. The Mileage are stopped but the speed drops to 0. When you turned off this device, everything will be back to normal. In the rarest of cases, a VDO speedometer is installed. Almost all Subaru Cars from all over the world have a Denso speedometer.

Warning

The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.