Deutsch 
Русский 
Español 
Italiano 
Français 
Portuguese 
Türkçe 
Ελληνικά 
Toyota Hilux AN1P (1st Facelift, 8th Gen.)
€554,00
- Do-it-yourself installation
- Untraceable performance
- Can be activated in motion
- Premium-quality plugs and heat-resistant cables
- Speedometer and assistance programs work flawlessly
- The ability to purchase with or without an app
€554,00
Delivery (1-3 business days)
Share us:
)
⚠️ Warning ⚠️
Dyno-Mode module – mileage protection for dyno
The Dyno-Mode module enables professional performance and dyno tests without increasing the vehicle’s mileage. Perfect for tuning workshops, dynos and motorsport enthusiasts. The module works similar to the dyno mode in Xentry, ODIS or ISTA and disables the odometer during test drives without affecting other vehicle systems.
⚠️ Attention: The Dyno-Mode module is intended exclusively for test purposes on closed tracks or test benches and is not approved for use on public roads. The seller accepts no liability for improper use or legal violations. Deactivation is possible at any time safely and without leaving any residue.
ATTENTION
Please note that if the returned items are not in the original condition, or show some signs of usage, this includes removing or damaging the casing and protective sleeve, you will not be entitled to a refund. Similarly, in case of returning the products after long usage, that goes beyond the testing of the properties and functionality, you will not get the full refund.
MILEAGE BLOCKER FOR TOYOTA Hilux AN1P (1st Facelift, 8th Gen.)
THIS DEVICE IS SUITABLE FOR ALL Toyota Hilux AN1P (1st Facelift, 8th Gen.) MODELS THAT WERE RELEASED FROM 2020 TILL 2025
Installation Videos
SPECIFICATIONS
- Easy DIY installation instruction
- Installation takes only up to an hour
- Attributed with high-quality plugs and heat-resistant cables
- Doesn’t leave a trace after removal
- No soldering or cutting of cables required
- Can be activated and deactivated while in motion
- After detachment, the mileage doesn’t increase spontaneously
- The diagnostic testers cannot find out if the mileage was altered by Toyota Hilux AN1P (1st Facelift, 8th Gen.) Mileage Stopper
- Selected settings will be saved unconditionally
- Mating face and Ridges on the connector guarantee a smooth installation process
- All assistance systems including the Speedometer work flawlessly
- No error messages shown on the speedometer or navigation panel
- Speedometer and assistance programs work flawlessly
ACTIVATION & DEACTIVATION
The activation/deactivation method depends on whether your Toyota has a Cruise Control or not
Pull the Cruise Control lever (situated on the right, under the steering wheel) towards you for 4 seconds
OR
Press and hold the CANCEL button for 10 seconds
OR
Pull the High Beam lever 4 times
or change modes via smartphone app
The module is always pre-activated in MODE 1 / ON
ON
The kilometers are stopped at 100%
Once the module is activated, the message “Driver’s door open” will appear briefly
OFF
The kilometers are counted at 100%
Once the module is deactivated, the message “Passenger door open” will appear briefly.
Toyota Hilux AN1P (1st Facelift, 8th Gen.) Kilometer Stopper tool always keeps previously applied settings. For that reason, there is no need to change the settings before starting a car next time.
The device can be activated or deactivated, either while in motion or when stationary.
What is Toyota Hilux AN1P (1st Facelift, 8th Gen.) Odometer Blocker or Mileage Correction Tool?
Toyota Hilux AN1P (1st Facelift, 8th Gen.) Mileage Blocker / Odometer Blocker, meant for stopping the mileage in a car while testing its performance. At Super Kilometer Filter you can buy the best module with genuine components. The device works equally efficiently whether the digital odometer of your vehicle counts mileage in miles or kilometers (km). The Mileage Blocker tool works perfectly on a diesel-gasoline engine, as well as Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars. Our programmers write software specifically for each maker and model to make sure that it works flawlessly. Install the module and use pre-determined key combinations to turn the tool on and off. We offer a big choice of Mileage Stopper devices for various vehicles. The installation process doesn’t require in-depth knowledge of a vehicle’s maintenance, which is the same for all the models and may take up to an hour. With help of the DIY instructions, which might take only up to an hour, you can enjoy all the benefits of this unique module. Be aware that, we don’t sell Mileage Correction tools for Toyota Hilux AN1P (1st Facelift, 8th Gen.) as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. They are usually used to rewind/roll back the distance traveled. However, cars have multiple data storage units and rollback tools still fail to reverse the mileage altogether. Toyota Hilux AN1P (1st Facelift, 8th Gen.) Mileage Blocker can be activated or deactivated anytime, in motion, and when stationary.
FAQ
Additional information
| Weight | 100 g |
|---|---|
| Dimensions | 20 × 12 × 4 mm |
Only logged in customers who have purchased this product may leave a review.
| Make | Model | Year |
|---|---|---|
| Toyota | Hilux AN1P (1st Facelift - 8th Gen.) | 2020 - 2025 |
Related products
Here you will find all the details about our company
Here you will find shipping and return related information
Here you will find information on all technical questions
Here you will find helpful information about installation
Reviews
There are no reviews yet.