AUDI R8 – 4S
€329,00
- Do-it-yourself installation
- Untraceable performance
- Can be activated in motion
- Premium-quality plugs and heat-resistant cables
- Speedometer and assistance programs work flawlessly
- The ability to purchase with or without an app
⚠️ Warning ⚠️
Dyno-Mode module – mileage protection for dyno
The Dyno-Mode module enables professional performance and dyno tests without increasing the vehicle’s mileage. Perfect for tuning workshops, dynos and motorsport enthusiasts. The module works similar to the dyno mode in Xentry, ODIS or ISTA and disables the odometer during test drives without affecting other vehicle systems.
⚠️ Attention: The Dyno-Mode module is intended exclusively for test purposes on closed tracks or test benches and is not approved for use on public roads. The seller accepts no liability for improper use or legal violations. Deactivation is possible at any time safely and without leaving any residue.
ATTENTION
Please note that if the returned items are not in the original condition, or show some signs of usage, this includes removing or damaging the casing and protective sleeve, you will not be entitled to a refund. Similarly, in case of returning the products after long usage, that goes beyond the testing of the properties and functionality, you will not get the full refund.
An important additional product
The mileage in Audi’s virtual cockpit may differ from the gearbox. Diagnostic testers can easily read the real data.
To synchronise the data, you need a Can Emulator. The Audi Can Emulator for Gearbox displays the same mileage on the speedometer and OBD scanners. Click on the following Product link
MILEAGE BLOCKER FOR AUDI R8 - 4S
THIS DEVICE IS SUITABLE FOR ALL AUDI R8 4S MODELS RELEASED FROM 2015 TILL 2024
Installation Videos
SPECIFICATIONS
- Has multiple modes to choose from
- Easy DIY installation
- Plug-in face and ridges on the connector ensure a smooth installation process
- Easy to use with multiple key combinations
- Leaves no trace when you remove it: no soldering or cutting of wires required
- No error messages on the speedometer or navigation panel
- Can be turned on and off while in motion
- Comes with premium-quality plugs and heat-resistant cables
- Chosen settings are saved unconditionally
- After detaching the module, the mileage doesn’t increase spontaneously
- Speedometer and all other assistance systems work depending on the selected mode
- The ability to purchase with or without an app
ACTIVATION & DEACTIVATION
Change modes via smartphone app or press the OK button for 10 seconds.
Repeat the process to switch from mode to mode.
The module is always pre-activated in MODE 1 / ON
Mode 1
The kilometers are stopped at 100%
Mode 2
Only 50% of the actual mileage is recorded
Mode 3
Only 25% of the actual mileage is recorded
Mode 4
Only 50% of the actual mileage is recorded
Mode 5
The kilometers are counted at 100%
Audi R8, 4S, FX Kilometer Stopper tool always keeps the last applied settings. For that reason, you don’t have to change the settings before starting a car next time.
The device can be activated or deactivated, either while in motion or when stationary.
What is Audi R8 Model 4S Odometer Blocker or Mileage Correction Tool?
Audi R8 Model 4S Mileage Blocker / Odometer Blocker helps you to stop the mileage in a car while testing its performance. We offer a wide variety of Mileage Stopper devices for various vehicles. At Super Kilometer Filter you can get the best module with genuine components. Whether the digital odometer of your vehicle counts mileage in miles or kilometers (km), the device will work equally efficiently. Our programmers write software specifically for each maker and model to make sure that it works flawlessly. Install the module and use pre-determined key combinations to change from mode to mode.
Be aware, we don’t sell Mileage Correction tools for Audi R8 Model 4S as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. They are usually used to rewind / rollback the distance traveled. However, cars have multiple data storage units and roll back tools still fail to reverse the mileage altogether.
The installation process is the same for all the models and doesn’t require in-depth knowledge of a vehicle’s maintenance. Plug it between the port of the speedometer and the instrument cluster and you can enjoy all the benefits of this unique module. The Mileage Blocker tool works perfectly on a diesel-gasoline engine, as well as, Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars.
Audi R8 Model 4S Mileage Blocker can be activated or deactivated anytime, whether the car is in motion or stationery.
FAQ
Additional information
| Weight | 100 g |
|---|---|
| Dimensions | 20 × 12 × 4 mm |
| Cable length | Long cable, Short cable |
| App compatibility | With App, Without App |
9 reviews for AUDI R8 – 4S
Only logged in customers who have purchased this product may leave a review.
| Make | Model | Year |
|---|---|---|
| Audi | R8 4S | 2015 - 2024 |
Here you will find all the details about our company
Here you will find shipping and return related information
Here you will find information on all technical questions
Here you will find helpful information about installation

Deutsch
Русский
Español
Italiano
Français
Portuguese
Türkçe
Ελληνικά







William –
the device work perfect, and thanks for fast customer support.
i will recommend you
Anonymous –
FLAWLESS
Anonymous –
Anonymous –
young kook byun –
I am very satisfied and I am very satisfied with the fast delivery and kindness.
john –
Definitely works as advertised. Easy install, even for someone that gets nervous about this sort of thing. Highly recommend. Shipping was incredibly fast 3 days to US… five stars ⭐️⭐️⭐️⭐️⭐️
Anonymous –
Best product best company best service
yoenjin kim김연진 (verified owner) –
최고제품입니다
albano m. (verified owner) –
SUPER