What happens if I remove the module again?

MILEAGE BLOCKER FOR BMW 4er G22/G23/G26/G83/I4

BMW 4er G22/G23/G26/G83/I4 Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

THIS DEVICE IS SUITABLE FOR ALL BMW 4er G22/G23/G26/G83/I4, MODELS THAT WERE RELEASED SINCE 2020

Installation Videos

SPECIFICATIONS

Do-it-yourself (DIY) installation
No need to open ECUs
Has multiple modes
If the vehicle has received a software update, you can simply activate mode two and continue using this device. No exchange or update required
Comes with premium-quality plugs and heat-resistant cables
No error messages on the speedometer or navigation panel
No soldering or cutting of cables required
Easy to operate with several key combinations

After removing the module, the mileage doesn’t increase spontaneously
Select settings once and they will be saved unconditionally
Speed indicator and assistance systems work (only in certain modes)
Mating face and Ridges on the connector guarantee a smooth installation process
Automatic Service adjustment
No error messages from Blind Spot Assist or cruise control failure
The ability to purchase with or without an app

For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.

ACTIVATION & DEACTIVATION for Live Cockpit

Change modes via smartphone app or press the BC button for 10 seconds

Repeat the process to switch from mode to mode

All percentages of the distance driven are approximate and not binding because they are influenced by the environment ( city/ traffic jam/ highway). And only after a longer distance of approx. 100 km / mi can you see what percentage was actually counted.

The module is always pre-activated in MODE 1 / ON

Mode 1
1. Vehicle till 2019 and without update and the live cockpit: Speed display works and the Mileage counting is stopped. 1. Vehicle: Speed = original, Counting miles approx 0-1%. Works only with models until 2019, without Update and the Live Cockpit.

2. Vehicle from 2019 or with update and the live cockpit: Counts after approx. 3 km of driving. Counts 100 % !!! 2. Vehicle: To change the mode, switch off the car. The speedometer should be off / black. (Open the door) choose right Mode for your car. The indicator: Turn light x1 flashes only inside the vehicle

Mode 2
No speed and the mileage counting is stopped for all vehicles

Speed = 3 mp/h, miles counting approx. 0-1%. Works absolutely on all vehicles. The indicator: Turn light x2 flashes only inside the vehicle

Mode 3
Speed display works and the miles count is reduced to 30%.

Interval count: stop 1 minute, count 15 seconds, repeat. 30 % is a guide value. The driving environment determines the count. Works independently of software updates for all vehicles until 2023. The indicator: Turn light x3 flashes only inside the vehicle

Mode 4
Speed display works and the miles count is reduced to 40%.

Interval count: stop 50 sec, count 20 seconds, repeat. 40 % is a guide value. The driving environment determines the count. Works independently of software updates for all vehicles until 2023. The indicator: Turn light x4 flashes only inside the vehicle

Mode 5
The kilometers are counted at 100%

The module is deactivated, the speedometer and the odometer work as usual.

BMW 4er G22/G23/G26/G83/I4 Kilometer Stopper tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.

The device can be activated or deactivated, either while in motion (only for certain vehicles) or when stationary.

ACTIVATION & DEACTIVATION for Curved Display

Change modes via smartphone app or press the BC button for 10 seconds

Repeat the process to switch from mode to mode

The Assistant systems might be unavailable temporarily.

The module is always pre-activated in MODE 1 / ON

Mode 1
1-2% of the mileage is counted, speed indicator works

The indicator: Turn light x1 flashes only inside the vehicle

Mode 2
~30% of the mileage is counted, speed indicator works

The indicator: Turn light x2 flashes only inside the vehicle

Mode 3
The kilometers are counted at 100% but the average consumption has stopped and is not increasing, speed indicator works

To keep the consumption balanced with the miles, you should regularly switch between modes 1 and 3. See video The indicator: Turn light x3 flashes only inside the vehicle

Mode 4
The kilometers are counted at 100%

The module is deactivated, the speedometer and the odometer work as usual. The indicator: Turn light x4 flashes only inside the vehicle

SERVICE ADJUSTMENT

Our Mileage Blocker not only stops counting covered distance in all memories of a vehicle but also automatically corrects the service. The only part which isn’t stopped while using the tool is „Service“. It is still counted down but does not record any mileage until 30% is remaining. If there remains 30% before the due date, it automatically jumps back up to 90%. If it’s pushed back up to 90% from 30%, before a message was sent, then that service reset is not recorded.

Each service is counted down from the traveled distance time. The service interval for a vehicle is structured like this. As a rule, a service must be made in every 30,000 km for diesel and 15,000 for petrol. The service is counted down while driving. If you drove 1,000 km then the next service would be in 29,000 km. If you stop mileage, then the service shouldn’t count down, but it still continues working until it reaches 30%. In the case of 30,000km, remained 30% is equal to 9,000 km.

When the kilometer stopper is active, it automatically pushes the service back up to 90%, so to 27,000km. Above mentioned numbers are not 100% correct, because many engines have different service intervals, but the percentages are correct.

What is BMW 4er G22/G23/G26/G83/I4 Odometer Blocker or Mileage Correction Tool?

BMW 4er G22/G23/G26/G83/I4 Mileage Blocker / Odometer Blocker was created for stopping the mileage in a car while testing its performance. At Super Kilometer Filter you can buy the best module with unique details. The module works perfectly even-if, the digital odometer of your vehicle counts mileage in miles or kilometers (km). Our programmers write software specifically for each maker and model to make sure that it works flawlessly. Install the module and use pre-determined key combinations to change from mode to mode.

Please remember, we don’t sell Mileage Correction tools for BMW 4er G22/G23/G26/G83/I4, as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. They are usually used to rewind/roll back the distance traveled. However, modern cars have multiple data storage units and rollback tools still fail to reverse the mileage altogether.

We offer a wide variety of Mileage Stopper devices for various vehicles. The installation process is the same for all the models and doesn’t require in-depth knowledge of a vehicle’s maintenance. Plug it between the port of the speedometer and the instrument cluster and you can enjoy all the benefits of this unique module. The Mileage Blocker tool works perfectly on a diesel-gasoline engine as well as Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars.

BMW 4er G22/G23/G26/G83/I4 Mileage Blocker is an extraordinary device, that allows you to test the performance of your automobile in a controlled environment.

FAQ

The Mileage Blocker unconditionally removes the mileage. The mileage figures will remain unchanged even after removing the module from the car. You can use our Mileage Blocker to alter the mileage and remove it anytime. Stopped mileage will not increase spontaneously after removing the module. However, in most cases, error messages should be deleted after removing the tool. Can Communications save any interruption messages as error messages. These are sporadic errors that do not necessarily have to be deleted, but it is recommended.

Warning

The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.

Additional information

Weight	100 g
Choose your Speedometer / Steering wheel	Curved Display, Live Cockpit
Cable length	Long cable, Short cable
App compatibility	With App, Without App

12 reviews for BMW 4er G22/G23/G26/G83/I4

Rated 5 out of 5

Abdullah Gürses – May 10, 2020

Richtige Einbau Anleitung wäre nett

(1) (0)
Rated 5 out of 5

Markus Steinbauer – May 20, 2020

(0) (0)
Rated 5 out of 5

Leo W. – May 24, 2020

Very happy with the results

(0) (0)
Rated 5 out of 5

Eric M. – June 24, 2020

I installed this in our BMW 4 series that we lease in 15 minutes works awesome!!

(0) (0)
Rated 4 out of 5

Anonymous (verified owner) – March 20, 2023

(0) (0)
- CRMTeam (store manager) – March 26, 2023
  
  Thank you for your valuable feedback.
Rated 4 out of 5

Anonyme (verified owner) – March 21, 2023

It was delivered as expected. Only mode 2 works on the G20. Sometimes the dashboard doesn’t start up. The app sometimes has connection issues, but resolves after reconnecting several times. Everything else works as expected.

(0) (0)
Rated 5 out of 5

Anonymous (verified owner) – March 21, 2023

Great 😊

(0) (0)
Rated 5 out of 5

Anonymous (verified owner) – March 22, 2023

Plug and Play installation. Very good tool

(0) (0)
- CRMTeam (store manager) – March 26, 2023
  
  We appreciate you sending us your feedback.
Rated 5 out of 5

Anonymous (verified owner) – July 26, 2023

Very good service and and fast sending TOP!!

(0) (0)
- Anna (store manager) – July 29, 2023
  
  Thank you so much! We’re grateful to have you as our client.
Rated 5 out of 5

Marek (verified owner) – August 14, 2023

Fast shipping. Good service and great product.

(0) (0)
- Anna (store manager) – August 14, 2023
  
  Thank you for your great review.
Rated 5 out of 5

Massimo Cardellini (verified owner) – December 5, 2023

i don t have the car yet , i will be getting the car in april and then be using the millage blocker , thank you

(0) (0)
Rated 5 out of 5

mantas (verified owner) – September 8, 2024

Working perfect

(0) (0)

Only logged in customers who have purchased this product may leave a review.

Make	Model	Year
BMW	4ER G22/G23/G26/G83/I4	2020 - 2024
BMW	I4 (G26)	2021 - 2024

Choose your Speedometer / Steering wheel Pay close attention to determine which interior (speedometer and steering wheel) you have to get the right product. As soon as you have chosen the right option, the relevant image will be displayed. Take into consideration every little detail. E.g. buttons on the steering wheel, the maximum speed, the year of construction, type of speedometer (analog or digital), and the plug connector on the cable. If you are unsure, please contact our customer service team before purchasing, they will be happy to assist you during the selection process.
Cable length Mileage Blocker with long cables are suitable for vehicles that require complicated installation process. The long end piece can be easily hidden behind a panel. If you want to remove the device for any reason, you can replace the Mileage Blocker with a blind plug and you will not have to completely dismantle the dashboard every time.	Long cable Short cable
App compatibility With this feature, you can connect your module directly to our SKF Speed App on your smartphone. This will allow you in the future to control your module easily and safely with your smartphone without complicated key combinations. When required, the module can be deactivated without having to remove it. The SKF Speed App has helpful features and provides useful information. It is the world's first smartphone app to control a Mileage Blocker.	With App Without App Clear

BMW 4er G22/G23/G26/G83/I4

€379,73 – €2.030,73