€249,00 – €354,00
Our Mileage Blocker not only stops counting covered distance in all memories of a vehicle but also automatically corrects the service. The only part which isn’t stopped while using the tool is „Service“. It is still counted down but does not record any mileage until 30% is remaining. If there remains 30% before the due date, it automatically jumps back up to 90%. If it’s pushed back up to 90% from 30%, before a message was sent, then that service reset is not recorded.
Each service is counted down from the traveled distance time. The service interval for a vehicle is structured like this. As a rule, a service must be made in every 30,000 km for diesel and 15,000 for petrol. The service is counted down while driving. If you drove 1,000 km then the next service would be in 29,000 km. If you stop mileage, then the service shouldn’t count down, but it still continues working until it reaches 30%. In the case of 30,000km, remained 30% is equal to 9,000 km.
When the kilometer stopper is active, it automatically pushes the service back up to 90%, so to 27,000km. The abovementioned numbers are not 100% correct, because many engines have different service intervals, but the percentages are correct.
Press the BC button for 10 seconds
Repeat the process to switch from mode to mode
0% of the actual mileage is recorded
Only works with G models without a software update since 2019. In this mode, the speed indicator works without any interference. The indicator: Turn light x1 flash
0% of the actual mileage is recorded
Only works with G models with updated software since 2019. In this mode, the speed indicator and assistance systems don’t work. The indicator: Turn light x2 flash
50% of the actual mileage is recorded
The speedometer shows only 50% of the actual data. The indicator: Turn light x3 flash
25% of the actual mileage is recorded
The speedometer shows only 25% of the actual data. The indicator: Turn light x4 flash
The kilometers are counted at 100%
Once the module is deactivated, the speedometer and odometer show actual data.
BMW X5 G05 Kilometer Stopper tool always continues working with previously applied settings. Hence, you don’t need to waste time changing the settings before starting a car next time.
The device can be activated or deactivated, either while in motion or when stationary.
BMW X5 G05 Mileage Blocker / Odometer Blocker gives you the possibility to stop counting mileage in a car while testing its performance. At Super Kilometer Filter you get the best module with unique components. Our programmers write software specifically for each maker and model to make sure that it works flawlessly. The tool works perfectly even-if, the digital odometer of your vehicle counts mileage in miles or kilometers (km). The Mileage Blocker tool works perfectly on a diesel-gasoline engine, as well as, Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars.
Please note, we don’t sell Mileage Correction tools for BMW X5 G05 as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. They are usually used to rewind/roll back traveled distance. Nonetheless, modern cars have multiple data storage units and rollback tools still fail to reverse the mileage altogether.
We offer a wide variety of Mileage Stopper devices for various vehicles. The installation process is the same for all the models and doesn’t require in-depth knowledge of a vehicle’s maintenance. Install the module and use pre-determined key combinations to change from mode to mode. Plug it between the port of the speedometer and the instrument cluster and you can enjoy all the benefits of this unique module.
BMW X5 G05 Mileage Blocker can be activated or deactivated anytime, whether the car is in motion or stationary.
The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.
|Which cable is right for you ?||
Long cable, Short cable
|Do you need this feature?||
With App, Without App
Here you will find all the details about our company
Here you will find shipping and return related information
Here you will find information on all technical questions
Here you will find helpful information about installation