What happens if I remove the module again?

MILEAGE BLOCKER FOR BMW X3 G01

BMW X3 G01 Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

THIS DEVICE IS SUITABLE FOR ALL BMW X3 G01 MODELS THAT WERE RELEASED SINCE 2017

Installation Videos

SPECIFICATIONS

Do-it-yourself (DIY) installation
Comes with high-quality plugs and heat-resistant cables
No need to open ECUs
No soldering or cutting of cables required
Easy to operate with several key combinations
Has multiple modes
Automatic Service adjustment

If the vehicle has received a software update, you can simply activate mode two and continue using this device. No exchange or update required
After removing the module, the mileage doesn’t increase spontaneously
Select settings once and they will be saved unconditionally
Speed indicator and assistance systems work (only in certain modes)
No error messages displayed on the speedometer or navigation panel
Mating face and Ridges on the connector guarantee a smooth installation process
No error messages from Blind Spot Assist or cruise control failure
The ability to purchase with or without an app

For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.

SERVICE ADJUSTMENT

Our Mileage Blocker not only stops counting covered distance in all memories of a vehicle but also automatically corrects the service. The only part which isn’t stopped while using the tool is „Service“. It is still counted down but does not record any mileage until 30% is remaining. If there remains 30% before the due date, it automatically jumps back up to 90%. If it’s pushed back up to 90% from 30%, before a message was sent, then that service reset is not recorded.

Each service is counted down from the traveled distance time. The service interval for a vehicle is structured like this. As a rule, a service must be made in every 30,000 km for diesel and 15,000 for petrol. The service is counted down while driving. If you drove 1,000 km then the next service would be in 29,000 km. If you stop mileage, then the service shouldn’t count down, but it still continues working until it reaches 30%. In the case of 30,000km, remained 30% is equal to 9,000 km.

When the kilometer stopper is active, it automatically pushes the service back up to 90%, so to 27,000km. The abovementioned numbers are not 100% correct, because many engines have different service intervals, but the percentages are correct.

ACTIVATION & DEACTIVATION

Change modes via smartphone app or press the BC button for 10 seconds

Repeat the process to switch from mode to mode

All percentages of the distance driven are approximate and not binding because they are influenced by the environment ( city/ traffic jam/ highway). And only after a longer distance of approx. 100 km / mi can you see what percentage was actually counted.

The module is always pre-activated in MODE 1 / ON

Mode 1
1. Vehicle till 2019 and without update and the live cockpit: Speed display works and the Mileage counting is stopped. 1. Vehicle: Speed = original, Counting miles approx 0-1%. Works only with models until 2019, without Update and the Live Cockpit.

2. Vehicle from 2019 or with update and the live cockpit: Counts after approx. 3 km of driving. Counts 100 % !!! 2. Vehicle: To change the mode, switch off the car. The speedometer should be off / black. (Open the door) choose right Mode for your car. The indicator: Turn light x1 flashes only inside the vehicle

Mode 2
No speed and the mileage counting is stopped for all vehicles

Speed = 3 mp/h, miles counting approx. 0-1%. Works absolutely on all vehicles. The indicator: Turn light x2 flashes only inside the vehicle

Mode 3
Speed display works and the miles count is reduced to 30%.

Interval count: stop 1 minute, count 15 seconds, repeat. 30 % is a guide value. The driving environment determines the count. Works independently of software updates for all vehicles until 2023. The indicator: Turn light x3 flashes only inside the vehicle

Mode 4
Speed display works and the miles count is reduced to 40%.

Interval count: stop 50 sec, count 20 seconds, repeat. 40 % is a guide value. The driving environment determines the count. Works independently of software updates for all vehicles until 2023. The indicator: Turn light x4 flashes only inside the vehicle

Mode 5
The kilometers are counted at 100%

The module is deactivated, the speedometer and the odometer work as usual.

BMW X3 G01 Kilometer Stopper tool always continues working with previously applied settings. Hence, you don’t need to waste time changing the settings before starting a car next time.

The device can be activated or deactivated, either while in motion (only for certain vehicles) or when stationary.

What is BMW X3 G01 Odometer Blocker or Mileage Correction Tool?

BMW X3 G01 Mileage Blocker / Odometer Blocker helps you stop counting extra mileage in a car while testing its performance. At Super Kilometer Filter you can buy the best module with genuine components. Whether the digital odometer of your vehicle counts mileage in miles or kilometers (km), the device will work equally efficiently. Our programmers write software specifically for each maker and model to make sure that it works flawlessly. Install the module and use pre-determined key combinations to change from mode to mode.

Please take into consideration that we don’t sell Mileage Correction tools for BMW X3 G01 as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. They are usually used to rewind/roll back the distance traveled. However, modern cars have multiple data storage units and rollback tools still fail to reverse the mileage altogether.

We offer a big variety of Mileage Stopper devices for various vehicles. The Mileage Blocker tool works perfectly on a diesel-gasoline engine as well as Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars. The installation process is simple and doesn’t require in-depth knowledge of a vehicle’s maintenance. Plug it between the port of the speedometer and the instrument cluster and enjoy all the benefits of this unique module.

BMW X3 G01 Mileage Blocker is an extraordinary device, that allows you to test the performance of your automobile in a controlled environment.

FAQ

The Mileage Blocker unconditionally removes the mileage. The mileage figures will remain unchanged even after removing the module from the car. You can use our Mileage Blocker to alter the mileage and remove it anytime. Stopped mileage will not increase spontaneously after removing the module. However, in most cases, error messages should be deleted after removing the tool. Can Communications save any interruption messages as error messages. These are sporadic errors that do not necessarily have to be deleted, but it is recommended.

Warning

The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.

Additional information

Weight	100 g
Engine type of your car	Diesel / Gasoline, Electric / Hybrid
Cable length	Long cable, Short cable
App compatibility	With App, Without App

7 reviews for BMW X3 G01

Rated 5 out of 5

Eduardas – June 7, 2021

Everything is good. Thank you.

(0) (0)
Rated 5 out of 5

Chris F. – June 30, 2021

Your company is awesome….always helpful and your product is great

(0) (0)
Rated 3 out of 5

Anonymous – October 17, 2021

The product came on time.
Zero domuntation, everything done via email or Whats app. My unit still does not work and I have no idea how it works.

(0) (0)
Rated 5 out of 5

Anonymous – March 24, 2022

great. My second car.

(0) (0)
Rated 5 out of 5

Anonymous (verified owner) – January 28, 2024

Its been a month since I’ve been testing out the filter for research purposes and i gotta say its absolutely amazing from the customer service to the easy installation process the product does exactly what the description says and i couldn’t be happier thank you everyone. Only thing i could wish for is if you guys were able to ship to the U.S like you did once in the past.

(0) (0)
- Anna (store manager) – January 28, 2024
  
  We are so glad that you are satisfied with our product.
  Please be aware that we ship devices to the USA without any issues, you have to make a purchase from our new website: https://canimmobilizer.com/
  Thank you for your kind review.
Rated 5 out of 5

Tomas K. (verified owner) – February 24, 2024

Works as described 👍✌️(have tried the ather stoper before witch looks very similar to this one for my elecrtic x3 lci 2023, but the trouble was that the speed parameters was wrong in all modes😬).

Have find one small problem with this one, the pasenger side blind zone sensors not working in all modes, ocourse exsept bypass. But it not showing any troubles in the car or with the diagnostic. Maybe selers can solw this for the future buyers😁.

Super fast delivery to my door in 2 days cross all the Europe✌️.

(1) (0)
Rated 5 out of 5

Alex (verified owner) – March 23, 2024

Everything was delivered quick. Works flawless on my 2021 X3 40d

(0) (0)

Only logged in customers who have purchased this product may leave a review.

Make	Model	Year
BMW	IX3 G08	2021 - 2026
BMW	X3 G01	2017 - 2026

Engine type of your car Select the correct engine of your vehicle. To get the right module
Cable length Mileage Blocker with long cables are suitable for vehicles that require complicated installation process. The long end piece can be easily hidden behind a panel. If you want to remove the device for any reason, you can replace the Mileage Blocker with a blind plug and you will not have to completely dismantle the dashboard every time.	Long cable Short cable
App compatibility With this feature, you can connect your module directly to our SKF Speed App on your smartphone. This will allow you in the future to control your module easily and safely with your smartphone without complicated key combinations. When required, the module can be deactivated without having to remove it. The SKF Speed App has helpful features and provides useful information. It is the world's first smartphone app to control a Mileage Blocker.	With App Without App Clear

BMW X3 G01

€379,73 – €513,08