Available exclusively at our shop from this week: The kilometer filter for BYD vehicles!
CADILLAC
Lyriq

1 Reviews

1 Reviews

Before ordering, please read carefully about the module activation and important notes on error messages and functions below.
FOR MODELS THAT WERE RELEASED SINCE 2022
  • Look carefully at the BCM in the driver’s side footwell. This is the product for the new generation BCM that has 8 plugs. If you have 7 plugs, please select the module for the old generation from your vehicle in the Shop
  • Engine control lamp lights up permanently, it has no effect on the engine
  • Important notice for the installation: use the grey plug on the picture no.4 and the green plug no.5
  • After installation, all error messages must be deleted once with a Diagnostic tool
  • Remote engine start does not work
  • App control is included for the “new generation BCM 8 Plug”
  • Attention! Does not work on electric vehicles and vehicles with new software from August 2024
Clear

ATTENTION

Please note that if the returned items are not in the original condition, or show some signs of usage, this includes removing or damaging the casing and protective sleeve, you will not be entitled to a refund. Similarly, in case of returning the products after long usage, that goes beyond the testing of the properties and functionality, you will not get the full refund.

MILEAGE BLOCKER FOR CADILLAC Lyriq

CADILLAC Lyriq Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

Installation Videos

SPECIFICATIONS

  • Comes with premium-quality plugs and heat-resistant cables
  • After removing the module, the mileage doesn’t increase spontaneously
  • No error messages displayed on the speedometer or navigation panel
  • Mating face and Ridges on the connector guarantee a smooth installation process
  • The average consumption cannot be calculated correctly
  • After installation, all error messages must be deleted once with a Dignostic tool
  • Easy to operate with several key combinations or the app
  • The diagnostic testers cannot discover the mileage altered by Cadillac Lyriq Mileage Stopper
  • Select settings once and they will be saved unconditionally
  • Engine control lamp lights up permanently, it has no effect on the engine
  • Speedometer and all the other assistance systems work flawlessly
  • Easy DIY installation, simply disconnect the connector from BCM and connect the tool between BCM and wiring
  • Doesn’t leave a trace if you detach the tool: no soldering or cutting of cables required
  • Attention! Does not work on electric vehicles and vehicles with new software from August 2024
For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.

ACTIVATION & DEACTIVATION

Change modes via smartphone app or pull the high beam lever four times

Repeat the process to switch from mode to mode

All percentages of the distance driven are approximate and not binding because they are influenced by the environment ( city/ traffic jam/ highway). And only after a longer distance of approx. 100 km / mi can you see what percentage was actually counted.

The module is always pre-activated in MODE 1 / ON

Attention! Does not work on electric vehicles and vehicles with new software from August 2024

Mode 1
0% of the actual mileage is recorded. This only works if you disconnect the battery and thus clear the errors.

Confirmation: Hazard lights flash 1x. This is the recommended MODE. Only if it does not work, try MODE 2.

Mode 2
0% of the actual mileage is recorded.

Confirmation: Hazard lights flash 2x. Please use MODE 1 and only use MODE 2 if MODE 1 does not work in your car.

Mode 3
The kilometers are counted at 100%.

Confirmation: Hazard lights flash 3x. The device is deactivated. Everything is in its original condition.

Cadillac Lyriq Kilometer Stopper tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.

The device can be activated or deactivated, either while in motion or when stationary.

What is Cadillac Lyriq Odometer Blocker or Mileage Correction Tool?

Cadillac Lyriq   Mileage Blocker / Odometer Blocker was created for stopping the mileage in a car while testing its performance. At Super Kilometer Filter you can get the best module with unique details. The Mileage Blocker tool works perfectly both, on a diesel-gasoline engine as well as Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars. Whether the digital odometer of your vehicle counts mileage in miles or kilometers (km), the device will work equally efficiently. Our programmers write software specifically for each maker and model in order to make sure that it works flawlessly.

Be aware, we don’t sell Mileage Correction tools for Cadillac Lyriq as they are meant for fraudulent purposes and can solely remove the mileage figures from odometers. They are usually used to rewind/roll back the distance traveled. However, modern cars have multiple data storage units and rollback tools still fail to reverse the mileage altogether.

We offer a wide variety of Mileage Stopper devices for various vehicles. Install the module and use pre-determined key combinations to turn the tool on and off. The installation process is the same for all the models and doesn’t require in-depth knowledge of a vehicle’s maintenance. Plug it between the port of the speedometer and the instrument cluster and you can enjoy all the benefits of this unique module.

Cadillac Lyriq Mileage Blocker can be activated or deactivated anytime, whether the car is in motion or stationary.

FAQ

The Mileage Blocker unconditionally removes the mileage. The mileage figures will remain unchanged even after removing the module from the car. You can use our Mileage Blocker to alter the mileage and remove it anytime. Stopped mileage will not increase spontaneously after removing the module. However, in most cases, error messages should be deleted after removing the tool. Can Communications save any interruption messages as error messages. These are sporadic errors that do not necessarily have to be deleted, but it is recommended.

Warning

The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.

Additional information

Weight 100 g
Choose your Speedometer / Steering wheel

BCM new, BCM old

App compatibility

With App, Without App

Cable length

Long cable, Short cable

1 review for CADILLAC Lyriq

  1. English

    Jared L. Zepeda

    An exellent device and an exellent support service.

    (0) (0)
    • English

      Anna (store manager)

      Thank you for your valuable feedback.

Only logged in customers who have purchased this product may leave a review.

Make Model Year
Cadillac Lyriq 2022 - 2025
Service center
CUSTOMER CENTER

Here you will find all the details about our company

Shipping and return

Here you will find shipping and return related information

Technical Support

Here you will find information on all technical questions

Installation Support

Here you will find helpful information about installation

Call
Whatsapp
Telegram
Messenger
Support