€245,00 – €345,00
Please note that if the returned items are not in the original condition, or show some signs of usage, this includes removing or damaging the casing and protective sleeve, you will not be entitled to a refund. Similarly, in case of returning the products after long usage, that goes beyond the testing of the properties and functionality, you will not get the full refund.
Change modes via smartphone app or press and hold the Return button ↩️ for approx. 10 seconds.
The mode is confirmed by sounding the “warning signal”. (Mode 1 is always active during installation)
Example: 1x warning signal = mode 1, 4x warning signal = mode 4
Repeat the process to switch from mode to mode.
The mileage counter is stopped 100%
The speed indicator doesn't work
10% of the driven mileage are counted and 1/10 of the actual speed is shown on the speedometer.
EXAMPLE: You drive 60mph and the speedo will show 6mph
The mileage is halved (50%) and the speedometer also shows 50% of the actual speed.
Example: You drive 100 mph on the speedometer 50 mph are displayed
The mileage counter is stopped 100%
The speed indicator works
Odometer counts 100% of the mileage
Hint for Mode 4: If the device shows a wrong speed, you have the option of adjusting the speed indicator so that everything is displayed correctly. For this you have to press the return button 10 times quickly and wait for a beep from the speedometer. Then you can use the up arrow and the down arrow on the left side of the steering wheel to move the speed indicator up and down. When you have set the speed display, press the OK button until you hear a beep from the speedometer. To get out of this speed adjustment mode you have to press the return button 12 times and wait until a beep appears. After Ignition OFF/ON speed adjustment Saves the speed calibration and also the last mode.
The speed calibration usually only has to be carried out once and then the correct speed is permanently displayed in mode 4.
Mercedes SL, R231, Kilometer Stopper tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.
The device can be activated or deactivated, either while in motion or when stationary.
Mercedes SL R231 Mileage Blocker / Odometer Blocker is meant for stopping the mileage in a car while testing its performance. At Super Kilometer Filter you can buy the best module with genuine components. Whether the digital odometer of your vehicle counts mileage in miles or kilometers (km), the device will work equally efficiently. The Mileage Blocker tool works perfectly on a diesel-gasoline engine, as well as, Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars. Our programmers write software specifically for each maker and model to make sure that it works flawlessly. Install the module and use pre-determined key combinations to change from mode to mode.
We don’t sell Mileage Correction tools for Mercedes SL R231 as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. They are usually used to rewind / rollback the distance traveled. However, cars have multiple data storage units and roll back tools still fail to reverse the mileage altogether.
We offer a wide variety of Mileage Stopper devices for various vehicles. The installation process is the same for all the models and doesn’t require in-depth knowledge of a vehicle’s maintenance. Plug it between the port of the speedometer and the instrument cluster and you can enjoy all the benefits of this unique module.
Mercedes SL R231 Mileage Blocker can be activated or deactivated anytime, whether the car is in motion or stationery.
The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.
|What is the maximum speed of the speedometer?||
260 KM/h – 160 MP/h, 320 KM/h – 200 MP/h
|Do you need this feature?||
With App, Without App
Here you will find all the details about our company
Here you will find shipping and return related information
Here you will find information on all technical questions
Here you will find helpful information about installation