Available exclusively at our shop from this week: The kilometer filter for BYD vehicles!
ROLLS ROYCE
PHANTOM VIII

1 Reviews

1 Reviews

Before ordering, please read carefully about the module activation and important notes on error messages and functions below.
FOR MODELS THAT WERE RELEASED SINCE 2018
  • Speed indicator and Aassistance programs work (only in certain modes)
  • No error messages from Blind Spot Assist or cruise control failure
  • Do-it-yourself installation
  • Premium-quality plugs and heat-resistant cables
  • The ability to purchase with or without an app
Clear

ATTENTION

Please note that if the returned items are not in the original condition, or show some signs of usage, this includes removing or damaging the casing and protective sleeve, you will not be entitled to a refund. Similarly, in case of returning the products after long usage, that goes beyond the testing of the properties and functionality, you will not get the full refund.

MILEAGE BLOCKER FOR ROLLS ROYCE PHANTOM VIII

ROLLS ROYCE PHANTOM VIII Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

THIS DEVICE IS SUITABLE FOR ALL ROLLS ROYCE PHANTOM VIII MODELS THAT WERE RELEASED SINCE 2018

Installation Videos

SPECIFICATIONS

  • Speed indicator and assistance systems work (only in certain modes)
  • Easily install using DIY instruction
  • The diagnostic testers cannot discover the mileage altered by Rolls Royce Phantom VIII Mileage Stopper
  • Mating face and Ridges on the connector guarantee a smooth installation process
  • Has multiple modes to choose from
  • Doesn’t leave a trace if you remove it: no soldering or cutting of cables required
  • Easy to operate with several key combinations
  • The cruise control and lane departure warning function work in the activated state
  • Selected settings are saved unconditionally
  • The tool has high-quality plugs and heat-resistant cables
  • No error messages from Blind Spot Assist or cruise control failure
  • No error messages displayed on the speedometer or navigation panel
  • After detaching the module, span doesn’t increase spontaneously
For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.

ACTIVATION & DEACTIVATION

Change modes via smartphone app or press the BC button for 10 seconds

Repeat the process to switch from mode to mode

All percentages of the distance driven are approximate and not binding because they are influenced by the environment ( city/ traffic jam/ highway). And only after a longer distance of approx. 100 km / mi can you see what percentage was actually counted.

Mode 1
1. Vehicle till 2019 and without update and the live cockpit: Speed display works and the Mileage counting is stopped. 1. Vehicle: Speed = original, Counting miles approx 0-1%. Works only with models until 2019, without Update and the Live Cockpit.

2. Vehicle from 2019 or with update and the live cockpit: Counts after approx. 3 km of driving. Counts 100 % !!! 2. Vehicle: To change the mode, switch off the car. The speedometer should be off / black. (Open the door) choose right Mode for your car. The indicator: Turn light x1 flashes only inside the vehicle

Mode 2
No speed and the mileage counting is stopped for all vehicles

Speed = 3 mp/h, miles counting approx. 0-1%. Works absolutely on all vehicles. The indicator: Turn light x2 flashes only inside the vehicle

Mode 3
Speed display works and the miles count is reduced to 30%.

Interval count: stop 1 minute, count 15 seconds, repeat. 30 % is a guide value. The driving environment determines the count. Works independently of software updates for all vehicles until 2023. The indicator: Turn light x3 flashes only inside the vehicle

Mode 4
Speed display works and the miles count is reduced to 40%.

Interval count: stop 50 sec, count 20 seconds, repeat. 40 % is a guide value. The driving environment determines the count. Works independently of software updates for all vehicles until 2023. The indicator: Turn light x4 flashes only inside the vehicle

Mode 5
The kilometers are counted at 100%

The module is deactivated, the speedometer and the odometer work as usual.

Rolls Royce Phantom VIII Kilometer Stopper tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.

The device can be activated or deactivated, either while in motion (only for certain vehicles) or when stationary.

What is Rolls Royce Phantom VIII Odometer Blocker or Mileage Correction Tool?

Rolls Royce Phantom VIII Mileage Blocker / Odometer Blocker avoids you counting extra mileage in a car while testing its performance. At Super Kilometer Filter you can buy the best module with genuine components. Our programmers write software specifically for each model to make sure it works flawlessly. Whether the digital odometer of your vehicle counts mileage in miles or kilometers (km), the device will work equally efficiently. Install the module and use pre-determined key combinations to change from mode to mode.

Please note, we don’t sell Mileage Correction tools for Rolls Royce Phantom VIII as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. Car-owners usually use it to rewind/roll back the covered distance. However, cars have several data storage units and rollback tools still fail to reverse the mileage altogether.

On our website, you can find a big choice of Mileage Stopper devices for various vehicles. The Mileage Blocker tool works perfectly on a diesel-gasoline engine as well as Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars. The installation process doesn’t require knowledge of a vehicle’s maintenance. Plug it between the port of the speedometer and the instrument cluster and enjoy all the benefits of this unique module.

Rolls Royce Phantom VIII Mileage Blocker is an extraordinary device, that allows you to test the performance of your automobile in a controlled environment.

FAQ

The Mileage Blocker unconditionally removes the mileage. The mileage figures will remain unchanged even after removing the module from the car. You can use our Mileage Blocker to alter the mileage and remove it anytime. Stopped mileage will not increase spontaneously after removing the module. However, in most cases, error messages should be deleted after removing the tool. Can Communications save any interruption messages as error messages. These are sporadic errors that do not necessarily have to be deleted, but it is recommended.

Warning

The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.

Additional information

Weight 100 g
App compatibility

With App, Without App

Cable length

Long cable, Short cable

1 review for ROLLS ROYCE PHANTOM VIII

  1. English

    tevan kag

    (1) (0)

Show only reviews in English (1)

Add a review

Your email address will not be published. Required fields are marked *

Make Model Year
Rolls Royce Phantom VIII 2018 - 2024
Service center
CUSTOMER CENTER

Here you will find all the details about our company

Shipping and return

Here you will find shipping and return related information

Technical Support

Here you will find information on all technical questions

Installation Support

Here you will find helpful information about installation

Call
Whatsapp
Telegram
Messenger
Support