1 Reviews
1 Reviews
Share us:
)
Dyno-Mode module – mileage protection for dyno
The Dyno-Mode module enables professional performance and dyno tests without increasing the vehicle’s mileage. Perfect for tuning workshops, dynos and motorsport enthusiasts. The module works similar to the dyno mode in Xentry, ODIS or ISTA and disables the odometer during test drives without affecting other vehicle systems.
⚠️ Attention: The Dyno-Mode module is intended exclusively for test purposes on closed tracks or test benches and is not approved for use on public roads. The seller accepts no liability for improper use or legal violations. Deactivation is possible at any time safely and without leaving any residue.
Please note that if the returned items are not in the original condition, or show some signs of usage, this includes removing or damaging the casing and protective sleeve, you will not be entitled to a refund. Similarly, in case of returning the products after long usage, that goes beyond the testing of the properties and functionality, you will not get the full refund.
The mileage in Seat’s virtual cockpit may differ from the gearbox. Diagnostic testers can easily read the real data.
To synchronise the data, you need a Can Emulator. The Seat Can Emulator for Gearbox displays the same mileage on the speedometer and OBD scanners. Click on the following Product link
Standard module: Switch modes via the smartphone app or press the OK button for 10 seconds. Repeat the process to switch from mode to mode.
Our Mileage blocker can also be used for vehicles without a multifunctional steering wheel
MODE SELECTION WITHOUT MULTI-WHEEL – Press the wiper lever down three times (switch from mode to mode with the windscreen wiper lever)
Ghost module: Change modes only via the smartphone app (the hazard lights indicate the modes). If you the OK button for 10 seconds, the device switches off and goes into mode 4. No display, no hazard lights.
Modes can only be changed via the smartphone app (the hazard lights indicate the modes). When using the steering wheel button, the Ghost module switches off and there is no visual feedback. All functions remain unchanged, only the installation position differs, and the device can only be controlled via Bluetooth.
All percentage values of the driven distance are approximate and not binding, as they are influenced by the environment (city/traffic jam/motorway). Only after a longer distance of about 100 km / mi can you see which percentage was actually counted.
The module is always pre-activated in MODE 1 / ON
Attention! Does not work on vehicles built from July 2024
Mode 1
The kilometers are stopped at 100%
Mode 2
Only 20% of the actual mileage is recorded
Mode 3
Only 30% of the actual mileage is recorded
Mode 4
The kilometers are counted at 100%
Seat Leon III (Typ 5F) Kilometer Stopper tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.
Seat Leon III (Typ 5F) Mileage Blocker / Odometer Blocker is used for stopping the mileage in a car while testing its performance. At Super Kilometer Filter you can get the best module with unique details. The Mileage Blocker tool works perfectly on a diesel-gasoline engine as well as Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars. Even-if, the digital odometer of your vehicle counts mileage in miles or kilometers (km), the device will work equally efficiently. Our programmers write software specifically for each maker and model to make sure that it works flawlessly. Install the module and use pre-determined key combinations to change from mode to mode.
Please remember, we don’t sell Mileage Correction tools for Seat Leon III (Typ 5F) as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. They are usually used to rewind/roll back the distance traveled. However, cars have multiple data storage units and rollback tools still fail to reverse the mileage altogether.
We offer a big variety of Mileage Stopper devices for various vehicles. The installation process is simple and doesn’t require in-depth knowledge of a vehicle’s maintenance. Plug it between the port of the speedometer and the instrument cluster and you can enjoy all the benefits of this unique module.
Seat Leon III (Typ 5F) Mileage Blocker is an extraordinary device, that allows you to test the performance of your automobile in a controlled environment.
The check engine light will no longer light up due to our device.
On many vehicles from the end of 2020, the check engine light would go on and off after a certain amount of time, this process would then repeat itself at regular intervals. This is now fixed.
| Weight | 100 g |
|---|---|
| Dimensions | 20 × 12 × 4 mm |
| Module variant | Ghost, Standard |
| App compatibility | With App, Without App |
Only logged in customers who have purchased this product may leave a review.
| Make | Model | Year |
|---|---|---|
| Seat | Leon III (Typ 5F) | 2012 - 2024 |
Here you will find all the details about our company
Here you will find shipping and return related information
Here you will find information on all technical questions
Here you will find helpful information about installation
Deutsch 
Русский 
Español 
Italiano 
Français 
Portuguese 
Türkçe 
Ελληνικά 
Anonymous –
it works very well, only the mode 1 doesn’t work as descripted, but mode 2 with 20% works perfect
Anonymous –
Amazing, 15 minute installation!