MILEAGE BLOCKER FOR TOYOTA HIGHLANDER (4th GEN.) XU70

After installation, it is pivotal to clear all error messages with a universal diagnostic tester. Follow the installation instructions and start the car. You will not have to do anything if there are no error messages. However, if error messages appear, the end piece should be unplugged and plugged back in. Afterwards, you can clear all error messages and the device will work without any issues.

The activation/deactivation method depends on whether your Toyota has a Cruise Control or not

Pull the Cruise Control lever (situated on the right, under the steering wheel) towards you for 4 seconds 
OR
Press and hold the CANCEL button for 10 seconds 
OR
Pull the High Beam lever 4 times

or change modes via smartphone app or press

All percentages of the distance driven are approximate and not binding because they are influenced by the environment ( city/ traffic jam/ highway). And only after a longer distance of approx. 100 km / mi can you see what percentage was actually counted.

The module is always pre-activated in MODE 1 / ON

The activation/deactivation method depends on whether your Toyota has a Cruise Control or not

Pull the Cruise Control lever (situated on the right, under the steering wheel) towards you for 4 seconds 
OR
Press and hold the CANCEL button for 10 seconds 
OR
Pull the High Beam lever 4 times

or change modes via smartphone app or press

All percentages of the distance driven are approximate and not binding because they are influenced by the environment ( city/ traffic jam/ highway). And only after a longer distance of approx. 100 km / mi can you see what percentage was actually counted.

The module is always pre-activated in MODE 1 / ON

Toyota Highlander XU70 Kilometer Stopper tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.

The device can be activated or deactivated, either while in motion or when stationary.

Toyota Highlander XU70 Mileage Blocker / Odometer Blocker is used for stopping counting unnecessary miles (km) in a car while testing its performance. At Super Kilometer Filter you can buy the best module tool with genuine components. Whether the digital odometer of your vehicle counts mileage in miles or kilometers (km), the device works equally efficiently. Our programmers write software specifically for each manufacturer and model, which gives a possibility to use the tool flawlessly. The Mileage Blocker tool works perfectly on a diesel-gasoline engine, as well as Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars.

Please note that we don’t sell Mileage Correction tools for Toyota Highlander XU70 as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. They are usually used to rewind/roll back the distance traveled. However, cars have multiple data storage units and rollback tools still fail to reverse the mileage altogether.

We offer a wide variety of Mileage Stopper devices for different vehicles. The installation process is easy and doesn’t require knowledge of a vehicle’s maintenance. For using the tool, plug it between the port of the speedometer and the instrument cluster, and you are ready to enjoy all the benefits.

Toyota Highlander XU70 Mileage Blocker can be activated and deactivated in 10 seconds. The activation and deactivation process can be done in motion or stationary mode.