TOYOTA PRIUS (3rd GEN.) XW30

1 Reviews

Before ordering, please read carefully about the module activation and important notes on error messages and functions below.

THIS DEVICE IS SUITABLE FOR ALL TOYOTA PRIUS (3rd GEN.) XW30 MODELS THAT WERE RELEASED BETWEEN 2009 - 2015

Do-it-yourself installation
Untraceable performance
Can be activated in motion
Premium-quality plugs and heat-resistant cables
Speedometer and assistance programs work flawlessly
The ability to purchase with or without an app

MILEAGE BLOCKER FOR TOYOTA PRIUS (3rd GEN.) XW30

Name: TOYOTA PRIUS (3rd GEN.) XW30
Brand: Super Kilometer Filter | Mileage Blocker
SKU: 147133
Availability: OutOfStock
Rating: 5.00 (1 reviews)

TOYOTA PRIUS (3rd GEN.) XW30 Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

SPECIFICATIONS

Easy DIY installation
No soldering or cutting of cables required
Installation takes less than an hour
The diagnostic testers cannot discover the mileage altered by Toyota Prius XW30 Mileage Stopper
Comes with heat-resistant cables and original, high-quality plugs
Can be turned on and off while in motion

Mating face and Ridges on the connector guarantee a smooth installation process
After detaching the Mileage Blocker, the mileage doesn’t increase spontaneously
Selected settings are saved unconditionally
Speedometer and all the other assistance systems work flawlessly
No error messages displayed on the speedometer or navigation panel

For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.

ACTIVATION & DEACTIVATION

The activation/deactivation method depends on whether your Toyota has a Cruise Control or not

Pull the Cruise Control lever (situated on the right, under the steering wheel) towards you for 4 seconds
OR
Press and hold the CANCEL button for 10 seconds
OR
Pull the High Beam lever 4 times

or change modes via smartphone app or press

ON
The kilometers are stopped at 100%

Once the module is activated, the message “Driver’s door open” will appear briefly

OFF
The kilometers are counted at 100%

Once the module is deactivated, the message “Passenger door open” will appear briefly.

Toyota Prius XW30 Kilometer Stopper tool always saves the last applied settings. So, after the deactivation, you don’t need to renew the settings before starting the new ride.

The device can be activated or deactivated in two modes, either while in motion or when stationary.

What is Toyota Prius XW30 3rd Generation Odometer Blocker or Mileage Correction Tool?

Toyota Prius XW30 Mileage Blocker/Odometer Blocker is meant for stopping the mileage in a car while testing how it actually works. At Super Kilometer Filter you can try the best module with genuine components. There is no difference in whether the digital odometer of your vehicle counts mileage in kilometers (km) or miles, the tool works perfectly in both cases. Our programmers write software specifically for each brand and model to make sure it works without any fault. The Mileage Blocker tool works perfectly on a diesel-gasoline engine, as well as Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars. Install the tool and enjoy using pre-determined key combinations to turn the tool on and off.

Please note that we don’t sell Mileage Correction tools for Toyota Prius XW30 as they are meant for deceitful purposes and complete removal of the mileage figures from odometers. Mileage Correction tools are usually used to rewind/roll back the distance traveled. However, cars have multiple data storage units and rollback tools still fail to reverse the mileage altogether.

We offer a big choice of Mileage Stopper devices for a wide range of vehicles. The installation process is the same for all the models and doesn’t require in-depth knowledge of a vehicle’s maintenance. Plugging the tool between the port of the speedometer and the instrument cluster is enough for enjoying all the benefits of this unique module.

Toyota Prius XW30 Mileage Blocker can be activated or deactivated while in motion or stationary.

FAQ

The Mileage Blocker unconditionally removes the mileage. The mileage figures will remain unchanged even after removing the module from the car. You can use our Mileage Blocker to alter the mileage and remove it anytime. Stopped mileage will not increase spontaneously after removing the module. However, in most cases, error messages should be deleted after removing the tool. Can Communications save any interruption messages as error messages. These are sporadic errors that do not necessarily have to be deleted, but it is recommended.

If your Toyota has a VDO speedometer, the speedometer will not work. The Mileage are stopped but the speed drops to 0. When you turned off this device, everything will be back to normal. In the rarest of cases, a VDO speedometer is installed. Almost all Toyota Cars from all over the world have a Denso speedometer.

Warning

The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.

Additional information

Weight	100 g
Cable length	Long cable, Short cable
App compatibility	With App, Without App

1 review for TOYOTA PRIUS (3rd GEN.) XW30

Rated 5 out of 5

Josh K. Potter – July 20, 2023

The product is plug and play, I installed it very easily, activation is also very easy. Thank you

(0) (0)
- Anna (store manager) – July 20, 2023
  
  Thanks for your feedback, it is much appreciated