Available exclusively at our shop from this week: The kilometer filter for BYD vehicles!
Toyota
Tacoma
Before ordering, please read carefully about the module activation and important notes on error messages and functions below.
THIS DEVICE IS SUITABLE FOR ALL Toyota Tacoma MODELS THAT WERE RELEASED FROM 2023
  • Do-it-yourself installation
  • Untraceable performance
  • Can be activated in motion
  • Premium-quality plugs and heat-resistant cables
  • Speedometer and assistance programs work flawlessly
  • The ability to purchase with or without an app
Clear

ATTENTION

Please note that if the returned items are not in the original condition, or show some signs of usage, this includes removing or damaging the casing and protective sleeve, you will not be entitled to a refund. Similarly, in case of returning the products after long usage, that goes beyond the testing of the properties and functionality, you will not get the full refund.

MILEAGE BLOCKER FOR Toyota Tacoma

Toyota Tacoma Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

THIS DEVICE IS SUITABLE FOR ALL Toyota Tacoma MODELS THAT WERE RELEASED FROM 2023

Installation Videos

SPECIFICATIONS

  • The DIY installation instruction offers easy and fast installation
  • The installation does not require cutting or soldering of cables
  • Installation takes less than an hour
  • The Mileage blocker tool comes with an original connector with a high-quality plug
  • Dismount the odometer, disconnect it and attach the tool with the original plug connector
  • It can be activated by pressing a button on the steering wheel
  • No error messages displayed on the speedometer or navigation panel
  • The confirmation of the activation will be displayed on the speedometer
  • The diagnostic testers cannot discover the mileage altered by Toyota Tacoma Mileage Stopper
  • Select settings once and they will be saved unconditionally
  • Mating face and Ridges on the connector guarantee a smooth installation process
  • Speedometer and assistance programs work flawlessly
For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.

Important note

After installation, it is pivotal to clear all error messages with a universal diagnostic tester. Follow the installation instructions and start the car. You will not have to do anything if there are no error messages. However, if error messages appear, the end piece should be unplugged and plugged back in. Afterwards, you can clear all error messages and the device will work without any issues.

ACTIVATION & DEACTIVATION

The activation/deactivation method depends on whether your Lexus has a Cruise Control or not

Pull the Cruise Control lever (situated on the right, under the steering wheel) towards you for 4 seconds 
OR
Press and hold the CANCEL button for 10 seconds 
OR
Pull the High Beam lever 4 times

or change modes via smartphone app or press

 

All percentages of the distance driven are approximate and not binding because they are influenced by the environment ( city/ traffic jam/ highway). And only after a longer distance of approx. 100 km / mi can you see what percentage was actually counted.

Mode 1
The kilometers are stopped at 100%

The fuel gauge is not displayed correctly

Mode 2
Only 1% - 2% of the actual mileage is recorded. We recommend to use this mode

The fuel gauge is displayed correctly, everything works as usual

Mode 3
100% of the actual mileage is recorded

The module is deactivated

Toyota Tacoma Kilometer Stopper tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.

The device can be activated or deactivated, either while in motion or when stationary.

What is Toyota Tacoma Odometer Blocker or Mileage Correction Tool?

Toyota Tacoma Mileage Blocker / Odometer Blocker can be used for stopping the mileage in a car while testing its performance. At Super Kilometer Filter you can buy the best module with genuine components. Whether the digital odometer of your vehicle counts mileage in miles or kilometers (km), the device workს equally efficiently. Our programmers write software specifically for each maker and model to make sure that it works flawlessly. The Mileage Blocker tool works perfectly on a diesel-gasoline engine, as well as Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars. The Mileage Blocker tool comes with DIY installation instructions and does not require specific knowledge of vehicles. Installation takes less than an hour. Install the module and use pre-determined key combinations to turn the tool on and off.

We don’t sell Mileage Correction tools for Toyota Tacoma as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. They are usually used to rewind/roll back traveled distance. Nonetheless, cars have multiple data storage units and rollback tools still fail to reverse the vehicle mileage altogether.

We offer a wide range of Mileage Stopper devices for various vehicles. The installation process doesn’t require in-depth knowledge of a vehicle’s maintenance and can be done within less than an hour. Plug it between the port of the speedometer and the instrument cluster, and you can enjoy all the benefits of this useful module.

Toyota Tacoma Mileage Blocker can be activated or deactivated anytime, in motion or stationary mode of the car.

FAQ

The Mileage Blocker unconditionally removes the mileage. The mileage figures will remain unchanged even after removing the module from the car. You can use our Mileage Blocker to alter the mileage and remove it anytime. Stopped mileage will not increase spontaneously after removing the module. However, in most cases, error messages should be deleted after removing the tool. Can Communications save any interruption messages as error messages. These are sporadic errors that do not necessarily have to be deleted, but it is recommended.

Warning

The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.

Additional information

Weight 100 g
Cable length

Long cable

App compatibility

With App, Without App

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Make Model Year
Toyota Tacoma 2023 - 2026

Related products

Service center
CUSTOMER CENTER

Here you will find all the details about our company

Shipping and return

Here you will find shipping and return related information

Technical Support

Here you will find information on all technical questions

Installation Support

Here you will find helpful information about installation

Call
Whatsapp
Telegram
Messenger
Support