What happens if I remove the module again?

MILEAGE BLOCKER FOR BMW X5 G05

BMW X5 G05 Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

THIS DEVICE IS SUITABLE FOR ALL BMW X5 G05 MODELS THAT WERE RELEASED FROM 2018 TILL 2024

Installation Videos

SPECIFICATIONS

Do-it-yourself (DIY) installation
Comes with premium-quality plugs and heat-resistant cables
No soldering or cutting of cables required
Easy to operate with several key combinations
Has multiple modes to choose from
After removing the module, the mileage doesn’t increase spontaneously

Select settings once and they will be saved unconditionally
Speed indicator and assistance systems work (only in certain modes)
No error messages displayed on the speedometer or navigation panel
Mating face and Ridges on the connector guarantee a smooth installation process
If the vehicle has received a software update, you can simply activate mode two and continue using this device. No exchange or update required
Automatic Service adjustment
No error messages from Blind Spot Assist or cruise control failure
The ability to purchase with or without an app

For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.

ACTIVATION & DEACTIVATION for Live Cockpit

Change modes via smartphone app or press the BC button for 10 seconds

Repeat the process to switch from mode to mode

All percentages of the distance driven are approximate and not binding because they are influenced by the environment ( city/ traffic jam/ highway). And only after a longer distance of approx. 100 km / mi can you see what percentage was actually counted.

The module is always pre-activated in MODE 1 / ON

Mode 1
1. Vehicle till 2019 and without update and the live cockpit: Speed display works and the Mileage counting is stopped. 1. Vehicle: Speed = original, Counting miles approx 0-1%. Works only with models until 2019, without Update and the Live Cockpit.

2. Vehicle from 2019 or with update and the live cockpit: Counts after approx. 3 km of driving. Counts 100 % !!! 2. Vehicle: To change the mode, switch off the car. The speedometer should be off / black. (Open the door) choose right Mode for your car. The indicator: Turn light x1 flashes only inside the vehicle

Mode 2
No speed and the mileage counting is stopped for all vehicles

Speed = 3 mp/h, miles counting approx. 0-1%. Works absolutely on all vehicles. The indicator: Turn light x2 flashes only inside the vehicle

Mode 3
Speed display works and the miles count is reduced to 30%.

Interval count: stop 1 minute, count 15 seconds, repeat. 30 % is a guide value. The driving environment determines the count. Works independently of software updates for all vehicles until 2023. The indicator: Turn light x3 flashes only inside the vehicle

Mode 4
Speed display works and the miles count is reduced to 40%.

Interval count: stop 50 sec, count 20 seconds, repeat. 40 % is a guide value. The driving environment determines the count. Works independently of software updates for all vehicles until 2023. The indicator: Turn light x4 flashes only inside the vehicle

Mode 5
The kilometers are counted at 100%

The module is deactivated, the speedometer and the odometer work as usual.

BMW X5 G05 Kilometer Stopper tool always continues working with previously applied settings. Hence, you don’t need to waste time changing the settings before starting a car next time.

The device can be activated or deactivated, either while in motion (only for certain vehicles) or when stationary.

ACTIVATION & DEACTIVATION for Curved Display

Change modes via smartphone app or press the BC button for 10 seconds

Repeat the process to switch from mode to mode

The Assistant systems might be unavailable temporarily.

The module is always pre-activated in MODE 1 / ON

Mode 1
1-2% of the mileage is counted, speed indicator works

The indicator: Turn light x1 flashes only inside the vehicle

Mode 2
~30% of the mileage is counted, speed indicator works

The indicator: Turn light x2 flashes only inside the vehicle

Mode 3
The kilometers are counted at 100% but the average consumption has stopped and is not increasing, speed indicator works

To keep the consumption balanced with the miles, you should regularly switch between modes 1 and 3. See video The indicator: Turn light x3 flashes only inside the vehicle

Mode 4
The kilometers are counted at 100%

The module is deactivated, the speedometer and the odometer work as usual. The indicator: Turn light x4 flashes only inside the vehicle

SERVICE ADJUSTMENT

Our Mileage Blocker not only stops counting covered distance in all memories of a vehicle but also automatically corrects the service. The only part which isn’t stopped while using the tool is „Service“. It is still counted down but does not record any mileage until 30% is remaining. If there remains 30% before the due date, it automatically jumps back up to 90%. If it’s pushed back up to 90% from 30%, before a message was sent, then that service reset is not recorded.

Each service is counted down from the traveled distance time. The service interval for a vehicle is structured like this. As a rule, a service must be made in every 30,000 km for diesel and 15,000 for petrol. The service is counted down while driving. If you drove 1,000 km then the next service would be in 29,000 km. If you stop mileage, then the service shouldn’t count down, but it still continues working until it reaches 30%. In the case of 30,000km, remained 30% is equal to 9,000 km.

When the kilometer stopper is active, it automatically pushes the service back up to 90%, so to 27,000km. The abovementioned numbers are not 100% correct, because many engines have different service intervals, but the percentages are correct.

What is BMW X5 G05 Odometer Blocker or Mileage Correction Tool?

BMW X5 G05 Mileage Blocker / Odometer Blocker gives you the possibility to stop counting mileage in a car while testing its performance. At Super Kilometer Filter you get the best module with unique components. Our programmers write software specifically for each maker and model to make sure that it works flawlessly. The tool works perfectly even-if, the digital odometer of your vehicle counts mileage in miles or kilometers (km). The Mileage Blocker tool works perfectly on a diesel-gasoline engine, as well as, Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars.

Please note, we don’t sell Mileage Correction tools for BMW X5 G05 as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. They are usually used to rewind/roll back traveled distance. Nonetheless, modern cars have multiple data storage units and rollback tools still fail to reverse the mileage altogether.

We offer a wide variety of Mileage Stopper devices for various vehicles. The installation process is the same for all the models and doesn’t require in-depth knowledge of a vehicle’s maintenance. Install the module and use pre-determined key combinations to change from mode to mode. Plug it between the port of the speedometer and the instrument cluster and you can enjoy all the benefits of this unique module.

BMW X5 G05 Mileage Blocker is an extraordinary device, that allows you to test the performance of your automobile in a controlled environment.

FAQ

The Mileage Blocker unconditionally removes the mileage. The mileage figures will remain unchanged even after removing the module from the car. You can use our Mileage Blocker to alter the mileage and remove it anytime. Stopped mileage will not increase spontaneously after removing the module. However, in most cases, error messages should be deleted after removing the tool. Can Communications save any interruption messages as error messages. These are sporadic errors that do not necessarily have to be deleted, but it is recommended.

Warning

The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.

Additional information

Weight	100 g
Engine type of your car	Diesel / Gasoline, Electric / Hybrid
Choose your Speedometer / Steering wheel	Curved Display, Live Cockpit
Cable length	Long cable, Short cable
App compatibility	With App, Without App

13 reviews for BMW X5 G05

Rated 5 out of 5

Anonymous – May 12, 2021

(0) (0)
Rated 5 out of 5

Witali – July 15, 2021

Top Produkt

(0) (0)
Rated 5 out of 5

Joe Douaihy – July 21, 2021

(0) (0)
Rated 5 out of 5

Niklas – August 24, 2021

Fast chipping and good kvalité

(0) (0)
Rated 5 out of 5

viktor – October 23, 2021

(0) (0)
Rated 5 out of 5

Anonymous – November 22, 2021

Excellent !!

(0) (0)
Rated 3 out of 5

Sebastian – January 18, 2022

Immer wenn das Fahrzeug Stopp ist beim Parken geht der Blinker Fahrerseite an.

(0) (0)
Rated 5 out of 5

Soare S. – April 9, 2022

Top ! Super

(0) (0)
Rated 5 out of 5

Anonymous – June 19, 2022

(0) (0)
Rated 4 out of 5

Michael E. – August 21, 2022

It works as described from seller. Unfortunately I have two issues after installation. 1st the instrument cluster stays black. That happens from time to time. I have to bring the car into sleep mode to solve the issue. 2nd is that after round about one hour I get always an error message that all assistance deactivated due an error. I need to reactivate the assistance and it works again. With the issues I can live.

(1) (0)
Rated 5 out of 5

Jenei Peter (verified owner) – April 8, 2023

Easy install.

(0) (0)
- Anna (store manager) – April 10, 2023
  
  Thanks for your review.
Rated 5 out of 5

Anonymous (verified owner) – April 16, 2023

(0) (0)
- Anna (store manager) – April 17, 2023
  
  We appreciate you sending us your feedback.
Rated 5 out of 5

Ramunas Puronas (verified owner) – March 9, 2024

Perfect

(0) (0)

Only logged in customers who have purchased this product may leave a review.

Make	Model	Year
BMW	X5 G05	2018 - 2024

Engine type of your car Select the correct engine of your vehicle. To get the right module
Choose your Speedometer / Steering wheel Pay close attention to determine which interior (speedometer and steering wheel) you have to get the right product. As soon as you have chosen the right option, the relevant image will be displayed. Take into consideration every little detail. E.g. buttons on the steering wheel, the maximum speed, the year of construction, type of speedometer (analog or digital), and the plug connector on the cable. If you are unsure, please contact our customer service team before purchasing, they will be happy to assist you during the selection process.
Cable length Mileage Blocker with long cables are suitable for vehicles that require complicated installation process. The long end piece can be easily hidden behind a panel. If you want to remove the device for any reason, you can replace the Mileage Blocker with a blind plug and you will not have to completely dismantle the dashboard every time.	Long cable Short cable
App compatibility With this feature, you can connect your module directly to our SKF Speed App on your smartphone. This will allow you in the future to control your module easily and safely with your smartphone without complicated key combinations. When required, the module can be deactivated without having to remove it. The SKF Speed App has helpful features and provides useful information. It is the world's first smartphone app to control a Mileage Blocker.	With App Without App Clear

BMW X5 G05

€379,73 – €513,08