BENTLEY MULSANNE

1 Reviews

Before ordering, please read carefully about the module activation and important notes on error messages and functions below.

FOR MODELS THAT WERE RELEASED SINCE 2018

Please check your connector (18 Pin) or (32 Pin) before ordering
Do-it-yourself installation
Premium-quality plugs and heat-resistant cables
Speedometer and assistance programs work flawlessly
The ability to purchase with or without an app

MILEAGE BLOCKER FOR BENTLEY MULSANNE

Name: BENTLEY MULSANNE
Brand: Super Kilometer Filter | Mileage Blocker
SKU: 147612
Availability: InStock
Rating: 5.00 (1 reviews)

BENTLEY MULSANNE Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

SPECIFICATIONS

Doesn’t leave a trace after detachment, no soldering or cutting of cables required
Do-it-yourself (DIY) installation, takes only up to an hour
Can be controlled with an optional app
Comes with premium-quality plugs and heat-resistant cables
Mating face and Ridges on the connector guarantee a smooth installation process
Easy to operate with several key combinations
Has multiple modes to choose from

The diagnostic testers cannot discover the mileage altered by Bentley Mulsanne Mileage Stopper
Selected settings are saved unconditionally
Speedometer and all the other assistance systems work flawlessly
No error messages displayed on the speedometer or navigation panel
After removing the module, the mileage doesn’t increase spontaneously

For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.

PLEASE READ THAT

If your vehicle has recently received an update from the manufacturer, the previous activation method will not be applicable anymore. Only mode one (full stop) and mode four (full count) will work. To activate the module, you must switch off the vehicle completely five times in a row. After the purchase, you will receive a PDF file with further details.

ACTIVATION & DEACTIVATION

Change modes via smartphone app or press the OK button for 10 seconds

Repeat the process to switch from mode to mode

Mode 1
0% of the actual mileage is recorded

The speed indicator works without any interference. To stop counting kilometers at 100%, you have to activate Mode 1 and park/turn off the car for 2 minutes

Mode 2
10% of the actual mileage is recorded

The speed indicator works without any interference.

Mode 3
Only 3% of the actual mileage is recorded

The speed indicator works without any interference.

Mode 4
The module is deactivated and the kilometers are counted at 100%

Bentley Mulsanne Kilometer Stopper tool always keeps previously applied settings. For that reason, you don’t need to change the settings before starting a car next time.

What is Bentley Mulsanne Odometer Blocker or Mileage Correction Tool?

Bentley Mulsanne Mileage Blocker / Odometer Blocker is used for stopping the mileage in a car while testing its performance. We offer a wide variety of Mileage Stopper devices for various vehicles. At Super Kilometer Filter you can buy the best module with genuine components. Whether the digital odometer of your vehicle counts mileage in miles or kilometers (km), the device will work equally efficiently. The Mileage Blocker tool works perfectly on a diesel-gasoline engine, as well as, Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars. Our programmers create software specifically for each maker and model, hence it works without any fault for each of them.

Please note, we don’t sell Mileage Correction tools for Bentley Mulsanne as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. They are usually used to rewind/roll back the distance traveled. However, cars have multiple data storage units and rollback tools still fail to reverse the mileage altogether.

Install the module and use pre-determined key combinations to change from mode to mode. The installation process is the same for all the models and doesn’t require in-depth knowledge of a vehicle’s maintenance. Plug it between the port of the speedometer and the instrument cluster and you can enjoy all the benefits of this unique module.

Bentley Mulsanne Mileage Blocker is an extraordinary device, that allows you to test the performance of your automobile in a controlled environment.

FAQ

The Mileage Blocker unconditionally removes the mileage. The mileage figures will remain unchanged even after removing the module from the car. You can use our Mileage Blocker to alter the mileage and remove it anytime. Stopped mileage will not increase spontaneously after removing the module. However, in most cases, error messages should be deleted after removing the tool. Can Communications save any interruption messages as error messages. These are sporadic errors that do not necessarily have to be deleted, but it is recommended.

As soon as this device is active and the odometer is stopped or partially halted, the engine control light may light up for vehicles from the end of 2020. As soon as this device is switched off, the engine control lamp goes out again after a few vehicle movements. While we stop or partially halt the odometer, we are manipulating some messages. As these messages are not transmitted, the “Check Engine” sign may appear. This is a sporadic error and it doesn’t portray any real problem either in the engine or in the transmission. This error can also be deleted at any time with a universal diagnostic device.

Warning

The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.

Bug fixed

The check engine light will no longer light up due to our device.

On many vehicles from the end of 2020, the check engine light would go on and off after a certain amount of time, this process would then repeat itself at regular intervals. This is now fixed.

Additional information

Weight	100 g
Pin connector of your car	18 Pin, 32 Pin
Cable length	Long cable, Short cable
App compatibility	With App, Without App

1 review for BENTLEY MULSANNE

Rated 5 out of 5

Daniel J. Smith – March 26, 2023

Very fast shipping, the blocker is exellent.

(0) (0)
- CRMTeam (store manager) – March 26, 2023
  
  We appreciate your feedback.

Show only reviews in English (1)

Add a review

Make	Model	Year
Bentley	Mulsanne	2018 - 2026

Pin connector of your car Some vehicle models have different connectors on the speedometer with different pin counts. The only way to find the right product is to remove the speedometer and count the pins on the connector. A large connector has 32 pins and a small connector 18 pins. When you select the number of pins, suitable pictures are displayed to help you.
Cable length Mileage Blocker with long cables are suitable for vehicles that require complicated installation process. The long end piece can be easily hidden behind a panel. If you want to remove the device for any reason, you can replace the Mileage Blocker with a blind plug and you will not have to completely dismantle the dashboard every time.	Long cable Short cable
App compatibility With this feature, you can connect your module directly to our SKF Speed App on your smartphone. This will allow you in the future to control your module easily and safely with your smartphone without complicated key combinations. When required, the module can be deactivated without having to remove it. The SKF Speed App has helpful features and provides useful information. It is the world's first smartphone app to control a Mileage Blocker.	With App Without App Clear

BENTLEY MULSANNE

€481,33 – €614,68