New Mileage Blocker generation with app control and long cable to choose from available for many models

BMW

3ER F30/F31/F34/F80

5 Reviews

BMW 3ER F30/F31/F34/F80

249,00349,00

Plus 19% VAT

5 Reviews

THIS DEVICE IS SUITABLE FOR ALL BMW 3ER F30/F31/F34/F80 MODELS THAT WERE RELEASED BETWEEN 2011 - 2019
  • Do-it-yourself installation
  • Untraceable performance
  • Can be activated in motion
  • Premium-quality plugs and heat-resistant cables
  • Speedometer and assistance programs work according to the selected mode
  • The ability to purchase with or without an app
Clear
Free shipping from 500 €
Worldwide Express available
Money back garantie
Easy Returns 30 days
Made in Germany Quality

MILEAGE BLOCKER FOR BMW 3ER F30/F31/F34/F80

BMW 3ER F30/F31/F34/F80 Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

THIS DEVICE IS SUITABLE FOR ALL BMW 3ER F30/F31/F34/F80 MODELS THAT WERE RELEASED BETWEEN 2011 - 2019

Installation Videos

SPECIFICATIONS

  • Do-it-yourself (DIY) installation
  • No need to open ECUs
  • Has multiple modes
  • If the vehicle has received a software update, you can simply activate mode two and continue using this device. No exchange or update required
  • Comes with premium-quality plugs and heat-resistant cables
  • No error messages on the speedometer or navigation panel
  • Doesn’t leave a trace if you remove it: no soldering or cutting of cables required
  • Easy to operate with several key combinations
  • Can be turned on and off while in motion
  • After removing the module, the mileage doesn’t increase spontaneously
  • The diagnostic testers cannot discover the mileage altered by BMW 3er F30/F31/F34/F80 Mileage Stopper
  • Select settings once and they will be saved unconditionally
  • Speed indicator and assistance systems work according to the selected mode
  • Mating face and Ridges on the connector guarantee a smooth installation process
  • Automatic Service adjustment
  • The ability to purchase with or without an app

SERVICE ADJUSTMENT

Our Mileage Blocker not only stops counting covered distance in all memories of a vehicle but also automatically corrects the service. The only part which isn’t stopped while using the tool is „Service“. It is still counted down but does not record any mileage until 30% is remaining. If there remains 30% before the due date, it automatically jumps back up to 90%. If it’s pushed back up to 90% from 30%, before a message was sent, then that service reset is not recorded.

Each service is counted down from the traveled distance time. The service interval for a vehicle is structured like this. As a rule, a service must be made in every 30,000 km for diesel and 15,000 for petrol. The service is counted down while driving. If you drove 1,000 km then the next service would be in 29,000 km. If you stop mileage, then the service shouldn’t count down, but it still continues working until it reaches 30%. In the case of 30,000km, remained 30% is equal to 9,000 km.

When the kilometer stopper is active, it automatically pushes the service back up to 90%, so to 27,000km. Above mentioned numbers are not 100% correct, because many engines have different service intervals, but the percentages are correct.

ACTIVATION & DEACTIVATION

Press the BC button for 10 seconds

Repeat the process to switch from mode to mode

Mode 1
0% of the actual mileage is recorded

Only works with F models without a software update since 2019. In this mode, the speed indicator works without any interference. The indicator: Turn light x1 flash

Mode 2
0% of the actual mileage is recorded

Only works with F models with updated software since 2019. In this mode, the speed indicator and assistance systems don’t work. The indicator: Turn light x2 flash

Mode 3
50% of the actual mileage is recorded

The speedometer shows only 50% of the actual data. The indicator: Turn light x3 flash

Mode 4
25% of the actual mileage is recorded

The speedometer shows only 25% of the actual data. The indicator: Turn light x4 flash

Mode 5
The kilometers are counted at 100%

Once the module is deactivated, the speedometer and odometer show actual data.

BMW 3er F30/F31/F34/F80 Kilometer Stopper tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.

The device can be activated or deactivated, either while in motion or when stationary.

What is BMW 3er F30/F31/F34/F80 Odometer Blocker or Mileage Correction Tool?

BMW 3er F30/F31/F34/F80 Mileage Blocker / Odometer Blocker was created for stopping the mileage in a car while testing its performance. At Super Kilometer Filter you can buy the best module with unique details. The module works perfectly even-if, the digital odometer of your vehicle counts mileage in miles or kilometers (km). Our programmers write software specifically for each maker and model to make sure that it works flawlessly. Install the module and use pre-determined key combinations to change from mode to mode.

Please remember, we don’t sell Mileage Correction tools for BMW 3er F30/F31/F34/F80 as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. They are usually used to rewind/roll back the distance traveled. However, modern cars have multiple data storage units and rollback tools still fail to reverse the mileage altogether.

We offer a wide variety of Mileage Stopper devices for various vehicles. The installation process is the same for all the models and doesn’t require in-depth knowledge of a vehicle’s maintenance. Plug it between the port of the speedometer and the instrument cluster and you can enjoy all the benefits of this unique module. The Mileage Blocker tool works perfectly on a diesel-gasoline engine as well as Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars.

BMW 3er F30/F31/F34/F80 Mileage Blocker can be activated or deactivated anytime, whether the car is in motion or stationary.

FAQ

The Mileage Blocker unconditionally removes the mileage. The mileage figures will remain unchanged even after removing the module from the car. You can use our Mileage Blocker to alter the mileage and remove it anytime. Stopped mileage will not increase spontaneously after removing the module. However, in most cases, error messages should be deleted after removing the tool. Can Communications save any interruption messages as error messages. These are sporadic errors that do not necessarily have to be deleted, but it is recommended.

⚠️ Warning ⚠️

The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.

Additional information

Weight 100 g
Do you need this feature?

With App, Without App

5 reviews for BMW 3ER F30/F31/F34/F80

  1. Dawid

    Perfect

  2. Cesar J.

  3. Robert

    totally shocked! great quality ! and price and even better customer care too

  4. Anonymous

  5. Anonymous

Add a review

Your email address will not be published. Required fields are marked *

Service center
CUSTOMER CENTER

Here you will find all the details about our company

Shipping and return

Here you will find shipping and return related information

Technical Support

Here you will find information on all technical questions

Installation Support

Here you will find helpful information about installation