MILEAGE BLOCKER FOR BMW X2 F39

Our Mileage Blocker not only stops counting covered distance in all memories of a vehicle but also automatically corrects the service. The only part which isn’t stopped while using the tool is „Service“. It is still counted down but does not record any mileage until 30% is remaining. If there remains 30% before the due date, it automatically jumps back up to 90%. If it’s pushed back up to 90% from 30%, before a message was sent, then that service reset is not recorded.

Each service is counted down from the traveled distance time. The service interval for a vehicle is structured like this. As a rule, a service must be made in every 30,000 km for diesel and 15,000 for petrol. The service is counted down while driving. If you drove 1,000 km then the next service would be in 29,000 km. If you stop mileage, then the service shouldn’t count down, but it still continues working until it reaches 30%. In the case of 30,000km, remained 30% is equal to 9,000 km.

When the kilometer stopper is active, it automatically pushes the service back up to 90%, so to 27,000km. The abovementioned numbers are not 100% correct, because many engines have different service intervals, but the percentages are correct.

Change modes via smartphone app or press the BC button for 10 seconds

Repeat the process to switch from mode to mode

All percentages of the distance driven are approximate and not binding because they are influenced by the environment ( city/ traffic jam/ highway). And only after a longer distance of approx. 100 km / mi can you see what percentage was actually counted.

The module is always pre-activated in MODE 1 / ON

BMW X2 F39 Kilometer Stopper tool always continues working with previously applied settings. Hence, you don’t need to waste time changing the settings before starting a car next time.

The device can be activated or deactivated, either while in motion (only for certain vehicles) or when stationary.

BMW X2 F39 Mileage Blocker / Odometer Blocker helps you stop counting mileage in a car while testing its performance. At Super Kilometer Filter you can buy the best module with genuine components. The tool works perfectly whether the digital odometer of your vehicle counts mileage in miles or kilometers (km). Our programmers write software specifically for each model to make sure it works flawlessly. Install the module and use pre-determined key combinations to change from mode to mode.

Please note, we don’t sell Mileage Correction tools for BMW X2 F39 as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. They are usually used to rewind/roll back the distance traveled. However, cars have multiple data storage units and rollback tools still fail to reverse the mileage altogether.

We offer a big variety of Mileage Stopper devices for various vehicles. Installation is simple and doesn’t require in-depth knowledge of a vehicle’s maintenance. The installation process might take only up to an hour. Plug it between the port of the speedometer and the instrument cluster and enjoy all the benefits of this unique module. The Mileage Blocker tool works perfectly on a diesel-gasoline engine, as well as, Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars.

BMW X2 F39 Mileage Blockeris an extraordinary device, that allows you to test the performance of your automobile in a controlled environment.