Available exclusively at our shop from this week: The kilometer filter for BYD vehicles!
MERCEDES
CLS CLASS C257

1 Reviews

1 Reviews

Before ordering, please read carefully about the module activation and important notes on error messages and functions below.
THIS DEVICE IS SUITABLE FOR ALL MERCEDES CLS-CLASS C257 MODELS THAT WERE RELEASED SINCE 2018
  • This device can only be used on one vehicle as it stores the internal chassis number!
  • Do-it-yourself installation
  • Easy to operate with several key combinations or the app
  • Speed indicator and Cruise control work flawlessly
  • Premium-quality plugs and heat-resistant cables
Clear

ATTENTION

Please note that if the returned items are not in the original condition, or show some signs of usage, this includes removing or damaging the casing and protective sleeve, you will not be entitled to a refund. Similarly, in case of returning the products after long usage, that goes beyond the testing of the properties and functionality, you will not get the full refund.

MILEAGE BLOCKER FOR MERCEDES CLS CLASS C257

MERCEDES CLS CLASS C257 Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

Installation Videos

SPECIFICATIONS

  • Easy and quick do-it-yourself (DIY) installation
  • Easy to operate with several key combinations or the app
  • Speed indicator and Cruise control work flawlessly
  • You can turn it on and off while in motion
  • Doesn’t create dashes on the odometer
  • No need to cut cables or solder the components in the electronic ignition lock
  • After removing the module, the mileage doesn’t increase spontaneously
  • Selected settings are saved unconditionally
  • Comes with premium-quality plugs and heat-resistant cables
  • Has multiple modes to choose from
  • Doesn’t leave a trace if you remove it
  • The diagnostic testers cannot discover the mileage altered by Mercedes CLS-Class C257 Mileage Stopper
  • Mating face and Ridges on the connector guarantee a smooth installation process
  •  In rare cases, the total mileage may be displayed as dashes.
For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.

IMPORTANT NOTE

Important Notice: Some assistance systems may not function properly on certain vehicles. The automatic high beam assistant is not supported if the car is equipped with a multibeam; however, the high beam can be operated manually. Furthermore, it should be noted that the navigation system is no longer available on the facelift models. While the CarPlay system works but route guidance is not supported.

ACTIVATION & DEACTIVATION

Change modes via smartphone app or press and hold the HOME-RETURN button for 10 seconds

Repeat the process to switch from mode to mode

All percentages of the distance driven are approximate and not binding because they are influenced by the environment ( city/ traffic jam/ highway). And only after a longer distance of approx. 100 km / mi can you see what percentage was actually counted.

The module is always pre-activated in MODE 1 / ON

Mode 1
10%-20% of the actual mileage is counted

The speedometer works without any interference. Lane Assist, Park Distance Control, and Reversing camera work as usual. The range and average consumption still might not be counted accurately

Mode 2
0 % - 2% of the actual mileage is counted

The speedometer works without any malfunction. The average consumption and range are not calculated correctly, but the tank level is always accurate. The range works independently of the tank level. Lane assistant works depending on the equipment of the car. To use all functions, switch off the device and everything works as usual. Other assistance systems work as usual

Mode 3
100% of the actual mileage is counted

The module is deactivated and everything works as usual

Mercedes CLS-Class C257 Kilometer Stopper tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.

The device can be activated or deactivated, either while in motion or when stationary.

What is Mercedes CLS-Class C257 Odometer Blocker or Mileage Correction Tool?

Mercedes CLS Class C257 Mileage Blocker / Odometer Blocker gives the possibility to stop the mileage in a car while testing its performance. It’s the most effective solution for the new generation of Mercedes vehicles and you can only buy it at Super Kilometer Filter. Whether the digital odometer of your vehicle counts mileage in miles or kilometers (km), the device will work equally efficiently. The Mileage Blocker tool works perfectly on a diesel-gasoline engine as well as Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars. Install the module and use pre-determined key combinations or the app to change from mode to mode.

Please take into consideration that we do not sell Mileage Correction tools for Mercedes CLS Class C257 as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. They are usually used to rewind/roll back the distance traveled. However, modern cars have multiple data storage units and rollback tools still fail to reverse the mileage altogether.

We offer a wide variety of Mileage Stopper devices for various vehicles. Our programmers write software specifically for each maker and model to make sure that it works flawlessly. The installation process is the same for all the models and doesn’t require in-depth knowledge of a vehicle’s maintenance. Plug it between the port of the speedometer and the instrument cluster and you can enjoy all the benefits of this unique module.

Mercedes CLS Class C257 Mileage Blocker can be activated or deactivated anytime, whether the car is in motion or stationary.

SPECIAL OFFER

You should purchase the Openport 2.0 from our shop as our device can resolve the issues with some vehicles that only display dashes instead of total kilometers after some time. If you encounter this issue, simply restore the synchronization with the ignition switch, and your car will start displaying the correct total kilometers. To do so, you will require the login token for the MB Tools software. Please contact our support team, and they will provide it to you. As an added benefit, you can make one of the following adjustments free of charge (the offer is only valid for those who have already bought the Openport 2.0 in our shop):

Speedometer programming:
customize your speedo, reset it (Virginize) and activate the AMG menu (only available on certain speedometers).

Carplay activation:
Activate Carplay with just a few clicks (only possible with suitable hardware).

Software updates:
Keep your vehicle up to date by carrying out software updates directly via MB Tools.

Add it to your shopping cart now and benefit from the advantages of this combined solution for your vehicle. Please note that we can only guarantee flawless functionality with the Openport purchased in our shop. We have devoted a lot of time to the research and development of this product to ensure it will work without any issues. Hence, we can guarantee the unblemished performance of our Openport 2.0 device even though those from other providers often have a lot of issues.

To view the programming options for your vehicle, please visit the MB Tools website and search for your car.

Here is the link to the Openport 2.0 device.

FAQ

The Mileage Blocker unconditionally removes the mileage. The mileage figures will remain unchanged even after removing the module from the car. You can use our Mileage Blocker to alter the mileage and remove it anytime. Stopped mileage will not increase spontaneously after removing the module. However, in most cases, error messages should be deleted after removing the tool. Can Communications save any interruption messages as error messages. These are sporadic errors that do not necessarily have to be deleted, but it is recommended.

Warning

The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.

Additional information

Weight 100 g
Vehicle model

Facelift, Pre-Facelift

1 review for MERCEDES CLS CLASS C257

  1. English

    Allen B. Ragin

    Works perfectly in my case. Was quite doubtful initially; however, it exceeded my expectations.

    Well Done!

    (0) (0)

Only logged in customers who have purchased this product may leave a review.

Make Model Year
Mercedes CLS CLASS W257 2018 - 2023
Service center
CUSTOMER CENTER

Here you will find all the details about our company

Shipping and return

Here you will find shipping and return related information

Technical Support

Here you will find information on all technical questions

Installation Support

Here you will find helpful information about installation

Call
Whatsapp
Telegram
Messenger
Support