Available exclusively at our shop from this week: The kilometer filter for BYD vehicles!

5 Reviews

Code: LN069

5 Reviews

Before ordering, please read carefully about the module activation and important notes on error messages and functions below.
  • Two devices are always sold, one is for the OBD2 connector and the second is the Kilometerfilter
  • Complicated installation
  • Remains permanently in the car
  • Premium-quality plugs and heat-resistant cables
  • Plug-and-play version and soldering
Plus shipping
In the shopping cart you will have the option to calculate the exact shipping cost based on the provided information

Delivery (1-3 business days)


Please note that if the returned items are not in the original condition, or show some signs of usage, this includes removing or damaging the casing and protective sleeve, you will not be entitled to a refund. Similarly, in case of returning the products after long usage, that goes beyond the testing of the properties and functionality, you will not get the full refund.


NISSAN Qashqai Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

Installation Videos


  • Installation is very complicated
  • Two devices are always sold, one is for the OBD2 connector and the second is the Kilometerfilter
  • Remains permanently in the car
  • Soldering and cutting of cables require
  • Plug-and-play version and soldering required
  • Installation requires specialized personnel in accordance with the instructions
  • Everything works as usual
  • The diagnostic testers cannot discover the mileage altered by Nissan Qashqai Mileage Stopper
  • Select settings once and save them unconditionally
  • Turn on and off while in motion
  • Easy to operate with key combinations
  • No error messages appear on the speedometer or navigation panel
For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.


Two devices are always sold, one for the OBD2 connection and the second is the kilometerfilter.

The component behind the speedometer must remain permanently installed in the car. If the module is removed and the speedometer is then reconnected to the original connector, the speedometer synchronizes with the ABS, which restores the reset kilometers. It is advisable to solder the circuit board of the super kilometer filter into the wiring harness to the speedometer to prevent unintentional removal. Observe all relevant safety and legal regulations. And the vehicle manufacturer’s installation and warranty instructions must be observed.

Before installation, the battery should be disconnected and some preparation is required. Both devices must be installed in the OBD2 connection and behind the speedometer.

The plug-and-play version is only available for the kilometer blocker and is easy to install, but must remain permanently in the car. The module for the OBD2 port must be soldered there is no other option.
The installation is very complicated and requires experience with car electronics and special tools. Beginners could damage the car.


Superkilometerfilter.com accepts no liability for damage caused by improper use.



Pull the high beam lever 5 times

The hazard warning lights flash briefly according to the currently selected mode: Mode 1 = 1x flashing, Mode 2 = 2x flashing.

Repeat the same process to switch from mode to mode.

These devices must be permanently installed in the vehicle (preferably soldered into the wiring harness) and cannot be removed after use.


Mode 1
0% of the actual mileage is recorded

Warning light flashes 1x

Mode 2
100% of the actual mileage is recorded

Warning light flashes 2x

Deactivate the module forever
Attention, this cannot be undone. Completely off, after which you can never switch the device on again.

Pull the high beam lever 15 times in quick succession. Warning light flashes 2x

Nissan Qashqai Kilometer Stopper tool always keeps previously applied settings. For that reason, you don’t have to change the settings before starting a car next time.

The device can be activated or deactivated, either while in motion or when stationary.

What is Nissan Qashqai Odometer Blocker or Mileage Correction Tool?

Nissan Qashqai Mileage Blocker / Odometer Blocker can help you to stop counting the mileage in a car while testing its performance. At Super Kilometer Filter you can get the best module with genuine details. Our programmers write software for each model to make sure it works flawlessly. The module works equally perfectly whether the digital odometer of your vehicle counts mileage in miles or kilometers (km). Install the module and use pre-determined key combinations to change from mode to mode.

Please take into consideration that we don’t sell Mileage Correction tools for Nissan Qashqai as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. Car-owners usually use it to rewind/roll back the covered distance. Nonetheless, cars have several data storage units and rollback tools still fail to reverse the mileage altogether.

You can find a big choice of Mileage Stopper devices for various vehicles on our webpage. The Mileage Blocker tool works perfectly on a diesel-gasoline engine as well as Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars. The installation process doesn’t require knowledge of a vehicle’s maintenance. It might take only up to an hour. Plug it between the port of the speedometer and the instrument cluster and enjoy all the benefits of this unique module.

Nissan Qashqai Mileage Blocker can be activated or deactivated anytime, whether the car is in motion or stationary.


The mileage does not stay the same after removing the module from the vehicle, it jumps back up and shows the real driven distance. The stopped mileage will increase after the module is removed. These devices must be permanently installed in the vehicle (preferably soldered into the wiring harness) and cannot be removed after use.


The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.

Additional information

Weight 100 g

5 reviews for NISSAN QASHQAI

There are no reviews yet.

Show only reviews in English (0)

Be the first to review “NISSAN QASHQAI”

Your email address will not be published. Required fields are marked *

Make Model Year
Nissan Qashqai 2021 - 2024

Related products

Service center

Here you will find all the details about our company

Shipping and return

Here you will find shipping and return related information

Technical Support

Here you will find information on all technical questions

Installation Support

Here you will find helpful information about installation