MILEAGE BLOCKER FOR TOYOTA bZ4X

After installation, it is pivotal to clear all error messages with a universal diagnostic tester. Follow the installation instructions and start the car. You will not have to do anything if there are no error messages. However, if error messages appear, the end piece should be unplugged and plugged back in. Afterwards, you can clear all error messages and the device will work without any issues.

The activation/deactivation method depends on whether your Toyota has a Cruise Control or not

Pull the Cruise Control lever (situated on the right, under the steering wheel) towards you for 4 seconds 
OR
Press and hold the CANCEL button for 10 seconds 
OR
Pull the High Beam lever 4 times

or change modes via smartphone app or press

All percentages of the distance driven are approximate and not binding because they are influenced by the environment ( city/ traffic jam/ highway). And only after a longer distance of approx. 100 km / mi can you see what percentage was actually counted.

The module is always pre-activated in MODE 1 / ON

Toyota bZ4X Kilometer Stopper tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.

The device can be activated or deactivated, either while in motion or when stationary.

Toyota bZ4X Mileage Blocker / Odometer Blocker can be used for stopping the mileage in a car while testing its performance. At Super Kilometer Filter you can buy the best module with genuine components. Whether the digital odometer of your vehicle counts mileage in miles or kilometers (km), the device workს equally efficiently. Our programmers write software specifically for each maker and model to make sure that it works flawlessly. The Mileage Blocker tool works perfectly on a diesel-gasoline engine, as well as Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars. The Mileage Blocker tool comes with DIY installation instructions and does not require specific knowledge of vehicles. Installation takes less than an hour. Install the module and use pre-determined key combinations to turn the tool on and off.

We don’t sell Mileage Correction tools for Toyota bZ4X as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. They are usually used to rewind/roll back traveled distance. Nonetheless, cars have multiple data storage units and rollback tools still fail to reverse the vehicle mileage altogether.

We offer a wide range of Mileage Stopper devices for various vehicles. The installation process doesn’t require in-depth knowledge of a vehicle’s maintenance and can be done within less than an hour. Plug it between the port of the speedometer and the instrument cluster, and you can enjoy all the benefits of this useful module.

Toyota bZ4X Mileage Blocker can be activated or deactivated anytime, in motion or stationary mode of the car.