Available exclusively at our shop from this week: The kilometer filter for BYD vehicles!
TOYOTA
SUPRA GR J29/DB (A90)

1 Reviews

1 Reviews

Before ordering, please read the information about module activation, the important notes about error messages and functions, and the legal information below.
THIS DEVICE IS SUITABLE FOR ALL TOYOTA SUPRA GR J29/DB (A90) MODELS THAT WERE RELEASED SINCE 2019
  • Speed indicator and Assistance programs work (only in certain modes)
  • No error messages from Blind Spot Assist or cruise control failure
  • Do-it-yourself installation
  • Premium-quality plugs and heat-resistant cables
  • The ability to purchase with or without an app
  • Also available as Ghost module
Clear

⚠️ Warning ⚠️

Dyno-Mode module – mileage protection for dyno
The Dyno-Mode module enables professional performance and dyno tests without increasing the vehicle’s mileage. Perfect for tuning workshops, dynos and motorsport enthusiasts. The module works similar to the dyno mode in Xentry, ODIS or ISTA and disables the odometer during test drives without affecting other vehicle systems.

 

⚠️ Attention: The Dyno-Mode module is intended exclusively for test purposes on closed tracks or test benches and is not approved for use on public roads. The seller accepts no liability for improper use or legal violations. Deactivation is possible at any time safely and without leaving any residue.

ATTENTION

Please note that if the returned items are not in the original condition, or show some signs of usage, this includes removing or damaging the casing and protective sleeve, you will not be entitled to a refund. Similarly, in case of returning the products after long usage, that goes beyond the testing of the properties and functionality, you will not get the full refund.

MILEAGE BLOCKER FOR TOYOTA SUPRA GR J29/DB (A90)

TOYOTA SUPRA GR J29/DB (A90) Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

SPECIFICATIONS

  • The tool has premium-quality plugs and heat-resistant cables
  • No soldering or cutting of cables required
  • Easy to operate with several key combinations
  • Has multiple modes to choose from
  • Do-it-yourself (DIY) installation might take only up to an hour
  • Mating face and Ridges on the connector guarantee a smooth installation process
  • Speed indicator and assistance systems work (only in certain modes)
  • Ghost module – installed in an alternative location, controlled exclusively via app
  • Ghost module – easy installation, removal of the speedometer is not required
  • Takes seconds to switch from mode to mode
  • After removing the module, the mileage doesn’t increase spontaneously
  • Select settings once and they will be saved unconditionally
  • No error messages from Blind Spot Assist or cruise control failure
  • No error messages are displayed on the speedometer or navigation panel
For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.

ACTIVATION & DEACTIVATION

Standard module: Switch modes via the smartphone app or press the BC button for 10 seconds. Repeat the process to switch from mode to mode.

Ghost module: Change modes only via the smartphone app (the hazard lights indicate the modes). If you press the BC button for 10 seconds, the device switches off and goes into mode 5. No display, no hazard lights.

Modes can only be changed via the smartphone app (the hazard lights indicate the modes). When using the steering wheel button, the Ghost module switches off and there is no visual feedback. All functions remain unchanged, only the installation position differs, and the device can only be controlled via Bluetooth.

All percentage values of the driven distance are approximate and not binding, as they are influenced by the environment (city/traffic jam/motorway). Only after a longer distance of about 100 km / mi can you see which percentage was actually counted.

The module is always pre-activated in MODE 1 / ON.

Mode 1
1. Vehicle till 2019 and without update and the live cockpit: Speed display works and the Mileage counting is stopped. 1. Vehicle: Speed = original, Counting miles approx 0-1%. Works only with models until 2019, without Update and the Live Cockpit.

2. Vehicle from 2019 or with update and the live cockpit: Counts after approx. 3 km of driving. Counts 100 % !!! 2. Vehicle: To change the mode, switch off the car. The speedometer should be off / black. (Open the door) choose right Mode for your car. The indicator: Turn light x1 flashes only inside the vehicle

Mode 2
No speed and the mileage counting is stopped for all vehicles

Speed = 3 mp/h, miles counting approx. 0-1%. Works absolutely on all vehicles. The indicator: Turn light x2 flashes only inside the vehicle

Mode 3
Speed display works and the miles count is reduced to 30%.

Interval count: stop 1 minute, count 15 seconds, repeat. 30 % is a guide value. The driving environment determines the count. Works independently of software updates for all vehicles until 2023. The indicator: Turn light x3 flashes only inside the vehicle

Mode 4
Speed display works and the miles count is reduced to 40%.

Interval count: stop 50 sec, count 20 seconds, repeat. 40 % is a guide value. The driving environment determines the count. Works independently of software updates for all vehicles until 2023. The indicator: Turn light x4 flashes only inside the vehicle

Mode 5
The kilometers are counted at 100%

The module is deactivated, the speedometer and the odometer work as usual.

Toyota Supra GR J29/DB (A90) Kilometer Stopper tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.

The device can be activated or deactivated, either while in motion (only for certain vehicles) or when stationary.

What is Toyota Supra GR J29/DB (A90) Odometer Blocker or Mileage Correction Tool?

Toyota Supra GR J29/DB (A90) Mileage Blocker / Odometer Blocker was created for stopping the extra mileage in a car while testing its performance. At Super Kilometer Filter you can buy the best module for your vehicle. We offer a wide variety of Mileage Stopper devices for various vehicles.

The Mileage Blocker tool works perfectly on a diesel-gasoline engine, as well as Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars. Our programmers write software specifically for each maker and model to make sure that it works flawlessly.
In case, the digital odometer of your vehicle counts mileage in miles or kilometers (km), the device works perfectly. Install the module and use pre-determined key combinations to change from mode to mode. The installation doesn’t require in-depth knowledge of a vehicle’s maintenance. Plug it between the port of the speedometer and the instrument cluster and you can enjoy all the benefits of this unique module.

Be aware, that we don’t sell Mileage Correction tools for Toyota Supra GR J29/DB (A90) as they are meant for fraudulent purposes and can solely remove the mileage figures from odometers. They are usually used to rewind/roll back the distance traveled. However, cars have multiple data storage units and rollback tools still fail to reverse the mileage altogether.

Toyota Supra GR J29/DB (A90) Mileage Blocker is an extraordinary device, that allows you to test the performance of your automobile in a controlled environment.

FAQ

The Mileage Blocker unconditionally removes the mileage. The mileage figures will remain unchanged even after removing the module from the car. You can use our Mileage Blocker to alter the mileage and remove it anytime. Stopped mileage will not increase spontaneously after removing the module. However, in most cases, error messages should be deleted after removing the tool. Can Communications save any interruption messages as error messages. These are sporadic errors that do not necessarily have to be deleted, but it is recommended.

Additional information

Weight 100 g
Module variant

Ghost, Standard

Cable length

Long cable, Short cable

App compatibility

With App, Without App

1 review for TOYOTA SUPRA GR J29/DB (A90)

  1. English

    tsung ju Hsieh

    (0) (0)

Only logged in customers who have purchased this product may leave a review.

Make Model Year
Toyota SUPRA GR J29/DB (A90) 2019 - 2025
Service center
CUSTOMER CENTER

Here you will find all the details about our company

Shipping and return

Here you will find shipping and return related information

Technical Support

Here you will find information on all technical questions

Installation Support

Here you will find helpful information about installation

Call
Whatsapp
Telegram
Messenger
Support