Please note that if the returned items are not in the original condition, or show some signs of usage, this includes removing or damaging the casing and protective sleeve, you will not be entitled to a refund. Similarly, in case of returning the products after long usage, that goes beyond the testing of the properties and functionality, you will not get the full refund.
Our Mileage Blocker not only stops counting covered distance in all memories of a vehicle but also automatically corrects the service. The only part which isn’t stopped while using the tool is „Service“. It is still counted down but does not record any mileage until 30% is remaining. If there remains 30% before the due date, it automatically jumps back up to 90%. If it’s pushed back up to 90% from 30%, before a message was sent, then that service reset is not recorded.
Each service is counted down from the traveled distance time. The service interval for a vehicle is structured like this. As a rule, a service must be made in every 30,000 km for diesel and 15,000 for petrol. The service is counted down while driving. If you drove 1,000 km then the next service would be in 29,000 km. If you stop mileage, then the service shouldn’t count down, but it still continues working until it reaches 30%. In the case of 30,000km, remained 30% is equal to 9,000 km.
When the kilometer stopper is active, it automatically pushes the service back up to 90%, so to 27,000km. The abovementioned numbers are not 100% correct, because many engines have different service intervals, but the percentages are correct.
Change modes via smartphone app or press the BC button for 10 seconds
Repeat the process to switch from mode to mode
Mode 1
Speed display works and the Mileage counting is stopped
Speed = original, Counting miles approx 0-1%. Works with models until 2019, without Update. The indicator: Turn light x1 flash
Mode 2
No speed and the Mileage counting is stopped
Speed = 3 mp/h, miles counting approx. 0-1%. Works absolutely on all vehicles. The indicator: Turn light x2 flash
Mode 3
Speed display works and the miles count is reduced to 30%.
Speed = original, KM counting approx. 30%. Works independently of software updates for all vehicles until 2022. The indicator: Turn light x3 flash
Mode 4
Speed display works and the miles count is reduced to 40%.
Speed = original, KM counting approx. 40%. Works independently of software updates for all vehicles until 2022. The indicator: Turn light x4 flash
Mode 5
The kilometers are counted at 100%
Once the module is deactivated, the speedometer and odometer show actual data
BMW X6 F16 Kilometer Stopper tool always continues working with previously applied settings. Hence, you don’t need to waste time changing the settings before starting a car next time.
The device can be activated or deactivated, either while in motion or when stationary.
BMW X6 F16 Mileage Blocker / Odometer Blocker helps to avoid extra mileage in a car while testing its performance. At Super Kilometer Filter you can buy the best module with genuine components. Our programmers write software specifically for each maker and model to make sure that it works flawlessly. The Mileage Blocker tool even works perfectly on a diesel-gasoline engine as well as Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars. Whether the digital odometer of your vehicle counts mileage in miles or kilometers (km), the device will work equally efficiently.
We don’t sell Mileage Correction tools for BMW X6 F16 as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. They are usually used to rewind/roll back the distance traveled. However, modern cars have multiple data storage units and rollback tools still fail to reverse the mileage altogether.
We offer a wide variety of Mileage Stopper devices for various vehicles. Install the module and use pre-determined key combinations to change from mode to mode. The installation process is the same for all the models and doesn’t require in-depth knowledge of a vehicle’s maintenance. Plug it between the port of the speedometer and the instrument cluster and you can enjoy all the benefits of this unique module.
BMW X6 F16 Mileage Blocker can be activated or deactivated anytime, whether the car is in motion or stationary.
The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.
Weight | 100 g |
---|---|
Do you need this feature? | With App, Without App |
Here you will find all the details about our company
Here you will find shipping and return related information
Here you will find information on all technical questions
Here you will find helpful information about installation
Johson –
Good product
James –
Perfect!
Raymond –
The device works perfect and easy to install.
Ryan –
Good product