MILEAGE BLOCKER FOR NISSAN Juke

Two devices are always sold, one for the OBD2 connection and the second is the kilometerfilter.

The component behind the speedometer must remain permanently installed in the car. If the module is removed and the speedometer is then reconnected to the original connector, the speedometer synchronizes with the ABS, which restores the reset kilometers. It is advisable to solder the circuit board of the super kilometer filter into the wiring harness to the speedometer to prevent unintentional removal. Observe all relevant safety and legal regulations. And the vehicle manufacturer’s installation and warranty instructions must be observed.

Before installation, the battery should be disconnected and some preparation is required. Both devices must be installed in the OBD2 connection and behind the speedometer.

The plug-and-play version is only available for the kilometer blocker and is easy to install, but must remain permanently in the car. The module for the OBD2 port must be soldered there is no other option.
The installation is very complicated and requires experience with car electronics and special tools. Beginners could damage the car.

Superkilometerfilter.com accepts no liability for damage caused by improper use.

Pull the high beam lever 5 times

The hazard warning lights flash briefly according to the currently selected mode: Mode 1 = 1x flashing, Mode 2 = 2x flashing.

Repeat the same process to switch from mode to mode.

These devices must be permanently installed in the vehicle (preferably soldered into the wiring harness) and cannot be removed after use.

Nissan Juke Kilometer Stopper tool always keeps previously applied settings. For that reason, you don’t have to change the settings before starting a car next time.

The device can be activated or deactivated, either while in motion or when stationary.

Nissan Juke Mileage Blocker / Odometer Blocker can help you to stop counting the mileage in a car while testing its performance. At Super Kilometer Filter you can get the best module with genuine details. Our programmers write software for each model to make sure it works flawlessly. The module works equally perfectly whether the digital odometer of your vehicle counts mileage in miles or kilometers (km). Install the module and use pre-determined key combinations to change from mode to mode.

Please take into consideration that we don’t sell Mileage Correction tools for Nissan Juke as they are meant for deceitful purposes and can solely remove the mileage figures from odometers. Car-owners usually use it to rewind/roll back the covered distance. Nonetheless, cars have several data storage units and rollback tools still fail to reverse the mileage altogether.

You can find a big choice of Mileage Stopper devices for various vehicles on our webpage. The Mileage Blocker tool works perfectly on a diesel-gasoline engine as well as Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars. The installation process doesn’t require knowledge of a vehicle’s maintenance. It might take only up to an hour. Plug it between the port of the speedometer and the instrument cluster and enjoy all the benefits of this unique module.

Nissan Juke Mileage Blocker can be activated or deactivated anytime, whether the car is in motion or stationary.